Suzuki Quadracer HQ

Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - General Discussion => Topic started by: Tim_79 on November 29, 2012, 07:06:20 pm

Title: Re: Jeting
Post by: Tim_79 on December 04, 2012, 03:27:58 pm

Thanks for the tips!! Thinking of useing flow tex do the work price sounds good any input on them?

Title: Re: Jeting
Post by: Q2W on December 04, 2012, 12:57:29 pm

If you do any work to the motor be sure to reenforce your jug at the intake.   Hate to see you do a bunch of work to it only to have the jug crack.  Also, I've seen flywheels nuke time and time again when you add HP to zillas.  Be sure to have the hub welded on the flywheel too.

Title: Re: Jeting
Post by: Tim_79 on December 04, 2012, 09:00:39 am

Thanks iam in the ball park il do some playin around let you no what i come up with. Just trying the Q pipe out out before i take the best apart plaining on fixing stock head(squish) V force mild port on cylinder stock bore weld crank air box mods any other thing should do to motor?

Title: Re: Jeting
Post by: WestTexasKing on December 03, 2012, 05:32:29 pm

The pipe won't affect the idle circuit nearly as much as the main jet.
I believe I used the same exact pilot jet with a slightly different pilot air screw setting.
However, you may want to drop the clip on the needle one position (effectively raising the needle), as the pipe will affect mid range too.
The 400 is probably where you'll wind up, but with winter temps you might start off with a 420 just to be safe.

Title: Re: Jeting
Post by: GrkGuy on December 03, 2012, 05:23:12 pm

i would try a 400, the 420 might be to much. i am guessing you are running stock carb and air box also.

Title: Re: Jeting
Post by: Tim_79 on December 03, 2012, 02:24:12 pm

1990 lt 500 stock going to put Q pipe on tinking off trying 420 main #30 poilot. stock settings is 380 main 22.5 poilot

Title: Re: Jeting
Post by: El Diablo on December 01, 2012, 11:07:18 pm

What is your currant jetting?

Title: Jeting
Post by: Tim_79 on November 29, 2012, 07:06:20 pm

I have stock 500 just got a Q pipe just want to try the pipe out befor i take it apart this winter what jet size do i go to?