Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: Rider414 on November 25, 2012, 05:23:29 pm

Title: Re: Quadzilla Front Fender Mount w/ Q Pipe
Post by: Nopick on November 25, 2012, 06:09:37 pm

Here is the solution I came up with.  I haven't finished it yet because it was a little short. 

(https://lh4.googleusercontent.com/-6NRk5djmPVM/ULK-K5yODqI/AAAAAAAAIMI/r5rBbIHxlno/s912/IMG_20121125_185411.jpg)

(https://lh3.googleusercontent.com/-p6qHxzh1yyE/ULK-cyk9YII/AAAAAAAAIMQ/6x3oFBF1N24/s912/IMG_20121125_185351.jpg)

Title: Re: Quadzilla Front Fender Mount w/ Q Pipe
Post by: Petenorth on November 25, 2012, 05:58:46 pm

Nice pic and setup! Thanks for the post.

Title: Quadzilla Front Fender Mount w/ Q Pipe
Post by: Rider414 on November 25, 2012, 05:23:29 pm

I have had this question asked a few times. Full fenders and the Q Pipe. The Q pipe and other similar pipes bulge right where the left side fender mount goes. Here is what I did. Its not as strong as the OEM mount but it works. It would work better if I added a double shear mount to go through the tube.

I cut the tube so that each support can be bolted up independently. Not the best but works for me. 

Or you can chop the dumbo ears. I like the OEM look.

(http://i435.photobucket.com/albums/qq76/elephantrider414/Quadzilla%20Build/IMAG0071.jpg)