Suzuki Quadracer HQ

LT250R Quadracer => LT250R - General Discussion => Topic started by: ktmrace on August 10, 2022, 05:38:44 pm

Title: Re: Extended A arms for the 87-92 LT250
Post by: ak47dennis on August 22, 2022, 08:49:54 am

You can also request +2's from Full flight, they will build them without the crappy frame side heims on the lower arms.

Title: Re: Extended A arms for the 87-92 LT250
Post by: ktmrace on August 11, 2022, 08:19:39 pm

Thanks for letting know about the Metal Tech +2 A arms and the Aaen Hybrid pipe.  Can you get me their contact info? (Phone or email)

Title: Re: Extended A arms for the 87-92 LT250
Post by: Rainman56 on August 11, 2022, 08:05:17 pm

I have Metal Tech +2 A arms on my 87...Fit was perfect...Aaen makes a Hybrid pipe that runs very well.

Title: Re: Extended A arms for the 87-92 LT250
Post by: Q2W on August 11, 2022, 06:37:49 am

There is a ton of info on this site.  Most people used the 85-86 frames for hybrids but there were some that used later years as well.  Should be details of frame mods. 

Title: Re: Extended A arms for the 87-92 LT250
Post by: ktmrace on August 10, 2022, 10:55:13 pm

Hi, I live in Oregon and I can't find any Laeger +2 A arms on facebook.  Can you give me a link to that ad?

Title: Re: Extended A arms for the 87-92 LT250
Post by: Andys92 on August 10, 2022, 06:12:04 pm

Someones is selling some +2 laegers on facebook

Title: Extended A arms for the 87-92 LT250
Post by: ktmrace on August 10, 2022, 05:38:44 pm

Who makes extended A arms for the 87-92 LT250r?  I am building a LT500 motor/LT250 frame hybrid--any help would be appreciated.  Also are there any custom pipes available such as Dr. Q's pipe for a Hybrid.