Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: Cmyers on July 29, 2019, 09:46:47 pm

Title: Re: Lt500/z400 fronend
Post by: Cmyers on August 02, 2019, 10:29:11 pm

I do not have Facebook. Just got a smartphone a few years back and I don't have a computer. Wife is dragging me out of my car and into the 21st. I ended up taking the z400 spindles to the machine shop. When I get those back I'll figure out what the next issue will be. There's always an issue!

Title: Re: Lt500/z400 fronend
Post by: Andys92 on August 02, 2019, 03:28:34 pm

Hate to ask this but are you on the FB groups also?

Title: Re: Lt500/z400 fronend
Post by: Cmyers on August 02, 2019, 11:26:53 am

I had previously read that. Thank you for making me out to be an idiot. I can't find and info on what ball joints to run as the zilla runs a larger one than the z400. There seems to be no definite answers to some of the swap. I am not opposed to figuring it out myself I just thought someone more knowledgeable would che in and help.

Title: Re: Lt500/z400 fronend
Post by: Rainman56 on August 02, 2019, 04:08:39 am

http://www.suzukiquadracerhq.com/chassis-suspension/lt500r-front-and-rear-brake-options/msg48671/#msg48671

Title: Lt500/z400 fronend
Post by: Cmyers on July 29, 2019, 09:46:47 pm

I was wondering if someone could walk me through putting z400 spindles and hubs onto an 88 lt500. I plan on running yfz calipers and currently have ells stage 3 shocks. Any help would be greatly appreciated.