Suzuki Quadracer HQ
LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: 2StrokeBandit on July 05, 2018, 12:41:03 pm
-
Glad you got the help you wanted! I don’t own a Zilla yet so I can’t give any advice. Sorry
-
that’ll help I guess 🤙🏽🙏🏽✌🏽 ... may thanks mate !!!!
-
You're talking about the shoulder screw that holds that brake stay bracket to the swingarm? If so, I'm sure McMaster Carr will have the needed size. https://www.mcmaster.com/#shoulder-screws/=1dqc8ds
-
just checked and measured today again. special bolt that goes thru is grinded down fpr sure by 1-2 mm ... wtf ...
now just checked megazip.net and all the other part providers but that bol especially seems to be discontinued. nothin’ on fleabay.
anyone got a spare one and willing to part ?!?
gimme a hand here folks ...
-
hmm don’t think that it has been grinded all the way down to be honest. I would have noticed.
what happens if I tighten that mofo bolt all ghe way up would that brake off that tap on the swinger ?!?
just asking :)))
-
The rear brake on my hybrid has always moved a tiny bit because of the bracket. You should be able to see if the bolt is messed up, if that's the issue. This probably doesn't help much lol.
-
come on folks ... anyone ?!?
Or do you just tighten the bolt up so the damn thing don´t move anymore ?
let me know pls ...
-
Hi there lads,
did a complete rebuild on my Zilla, the only thing which gives me headaches is the little brake stay bracket on the swinger.
Either the hole of the bracket is f´ed up (grew bigger) or the bolt that goes thru it, is a little eaten up / grinded ?
hence when i hit the rear brake, it clics and clacs on me, since it has a tiny bit of play due to the above described state.
is that a known problem and is there a fix for that ? ah knows that theres a new brake bracket available, but I just dunno if its the bracket or the bolt
any help would be deeply appreciated ...