Suzuki Quadracer HQ

Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - Announcements => Topic started by: The_DUDE on January 08, 2018, 01:01:53 pm

Title: Re: Front hub swap on a 86
Post by: Motoman991 on January 09, 2018, 05:37:51 am

I'm currently doing a spindle swap on my 88' using 400ex spindles/hubs and yfz450 brake calipers.  The OEM upper ball joints should work.  Last week I got the lower ball joints in the mail.  I had to get 400ex lowers that are for after market a-arms.  I haven't tried mounting them yet, but I'm pretty sure they will work.  They obviously fit in the 400ex spindles and the a-arm mounting looks to be same as OEM.  The dual piston yfz450 calipers will work on the 400ex spindles without any modification.

This is as far as I've gotten.

Title: Front hub swap on a 86
Post by: The_DUDE on January 08, 2018, 01:01:53 pm

Looking for some information on front hub swap for an 86 LT... wondering if a set of stock 2007 yfz450 front hub/rotor will work on my quadracer... i have seen a lot of information that confirms this but curiois if anyone has had success with this swap and if any adjustments with seals, washers, etc was needed