Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: hotwheels on August 14, 2017, 06:14:51 pm

Title: Re: Quadzilla A Arm update.
Post by: El Diablo on September 17, 2017, 10:42:40 am

Garrett, I think that guy was spam. He's gone now.

Title: Re: Quadzilla A Arm update.
Post by: BadMoonRacing500 on September 17, 2017, 02:50:56 am

Quote from: Ronaldost on September 14, 2017, 09:37:52 pm

The service is quick guidelines that can be used to make everyday.

What and who are you talking about? If you want A/arms or swingers call Tyler at Metaltech. https://www.facebook.com/Tyler-Renner-Metal-Tech-Custom-Fabrication-284518968241011/?pnref=about.work

Title: Re: Quadzilla A Arm update.
Post by: hotwheels on August 16, 2017, 09:32:38 pm

I actually am going through Fireball racing, Larry there is making mine. there gonna be +2. but I did see another post b4, that said something about using stock ball joints," Use upper ball joints, upper and lower." 

Title: Re: Quadzilla A Arm update.
Post by: Rensch26 on August 16, 2017, 07:55:16 am

Yeah I wasn't sure how much further or closer the Z400 spindle would place the tie rod end compared to the zilla. What have you guys used for brake components? Braided lines? From what model? What master cylinder and hose are you running? And are you using the stock Zilla hard brake lines?

Title: Re: Quadzilla A Arm update.
Post by: Q2W on August 16, 2017, 06:17:24 am

i believe metal tech makes the tie rods too.  They'll have to be longer.

Title: Re: Quadzilla A Arm update.
Post by: Rensch26 on August 15, 2017, 07:25:58 pm

I'd like to do this as well. What did you guys have to do about tie rods? I'd like to just go with stock width a-arms so would I just be able to use the Zilla tie rods?

Title: Re: Quadzilla A Arm update.
Post by: FX4Pitrone on August 15, 2017, 06:57:48 pm

I have that set up on mine... contact Tyler at metal tech and he'll make em for ya

Title: Quadzilla A Arm update.
Post by: hotwheels on August 14, 2017, 06:14:51 pm

I need some +2 A arms for my Quadzilla Project. And , here is the kicker. the ball joints on the new A arms need to fit LTZ 400 Spindles/knuckles. I have the steering knuckles/spindles. LTZ 400 hubs w/ rotors. the update is to run the twin piston caliper from the YFZ 450. so I also have the complete twin piston brake set up from the YFZ 450 and with master cyl and lever. i'm also gonna run Elka stage 3 shocks at stock length. ( this way I will have better brakes and be able to run Suzuki/Honda bolt and switch off wheels from my other quad.) Other benefits is that it should be lighter and better to find parts.