Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Engine => Topic started by: KIKBAK1 on August 09, 2017, 09:22:21 pm

Title: Re: Gearing/Petecock
Post by: KIKBAK1 on August 10, 2017, 06:14:16 pm

I'll keep that in mind, will probably take it to the motorcycle shop down the street eventually.

Title: Re: Gearing/Petecock
Post by: Q2W on August 10, 2017, 11:46:07 am

Try a carb rebuild.

Title: Re: Gearing/Petecock
Post by: Rainman56 on August 10, 2017, 07:59:07 am

Sounds like you need a new needle and seat in the carb as well as likely a good cleaning.

Title: Gearing/Petecock
Post by: KIKBAK1 on August 09, 2017, 09:22:21 pm

Is it me, or is 1st gear really short? On my KX I can hold 1st gear longer & it still keeps torque. On the quad, 1st is short and if I hold too long, I can feel the power drop. I've only been up and  down the block, i think the gas might be old too.

I've also notice that gas drips from the carb even the the fuel switch is in the off position. Is this an easy fix, or is it time for a new one?