Suzuki Quadracer HQ

LT500R Quadracer => LT500R- Exhaust => Topic started by: 6bt on January 09, 2017, 06:26:25 pm

Title: Re: Best trail pipe to work with stock plastic
Post by: SuperNutt on January 10, 2017, 05:37:38 pm

I have a dyno port mid top pipe.  It fits perfect with the stock plastics but it doesn't seem to perform very well.  I put a FMF pipe on the same quad and it woke it right up.  Pulls the front tires from what seems like idle. It doesn't rev out real high but I prefer this pipe in the trails compared to my HPR pipe.  No cutting of the fenders and they are cheap and plentiful.

Title: Re: Best trail pipe to work with stock plastic
Post by: Rensch26 on January 10, 2017, 11:59:15 am

I would agree with the Paul Turner. It's a great trail pipe and works with all the stock plastics and supports.

Title: Re: Best trail pipe to work with stock plastic
Post by: Gillio on January 09, 2017, 08:15:22 pm

Probably a Paul Turner. they are a great trail pipe.

Title: Re: Best trail pipe to work with stock plastic
Post by: 6bt on January 09, 2017, 07:03:52 pm

I just wanted to keep the quad as close to stock looking as possible as far as plastics go.

Title: Re: Best trail pipe to work with stock plastic
Post by: ATVMXR on January 09, 2017, 07:02:11 pm

Why?  Just so you can have dumbo ears?   They don't do crap to keep mud/water off.   You could make a big half circle cut out.

Title: Best trail pipe to work with stock plastic
Post by: 6bt on January 09, 2017, 06:26:25 pm

I was wondering what the best trailpipe to use with the stock (Maier) plastic. I plan on keeping the dumbo ears on and using the support bracket. Just curious what will fit a "stock" setup. I currently have the dynoport and stock pipe. Not crazy about the dynoport.