Suzuki Quadracer HQ

LT500R Quadracer => LT500 - General Discussion => Topic started by: Quadracer on September 13, 2016, 04:49:22 pm

Title: Re: oversize
Post by: Glamisrider on September 19, 2016, 10:28:16 am

You can always try it and see how it does with a bigger jet in it.

If it does not work then you can always go back.

Title: Re: oversize
Post by: Q2W on September 14, 2016, 06:22:47 am

Your jetting usually changes as your compression changes.

Title: Re: oversize
Post by: ZillaFreak on September 14, 2016, 05:28:55 am

Should you have to rejet for doing an overbore job, no.
Should you check your jetting, yes.

Also check your jetting when you do something. Better safe than sorry.

Title: oversize
Post by: Quadracer on September 13, 2016, 04:49:22 pm

Hi guys, I recently oversized my 500 88, 88mm to 89mm. I want to know if i need a bigger jet in the carb. IT was running good before the compression problem. Now It run good at low thru mid range but after that, it run like they missing gas or air. i just do the oversize, no more modif on it. I run FMF pipe and silencer, 38mm mikuni and radvalve with boysen proseries reeds. Run with the airbox no lid with KN filter.
Tks