Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Engine => Topic started by: Rainman56 on September 13, 2016, 04:36:30 pm

Title: Re: 38mm PWK needle recommendation.
Post by: Rainman56 on September 28, 2016, 04:49:10 pm

I'm gonna try a DGH needle and see how it goes from there...Seems no one has run one on a 250.:(

Title: Re: 38mm PWK needle recommendation.
Post by: LTZ-450 on September 21, 2016, 06:48:27 pm

I have a bored 38 air striker on my Bartlett 302 and have a ECE needle in it.

Title: Re: 38mm PWK needle recommendation.
Post by: Q2W on September 21, 2016, 06:22:59 am

Got rid of the PWK and went back to mukuni as fast as i could.

Title: Re: 38mm PWK needle recommendation.
Post by: Rainman56 on September 21, 2016, 04:50:11 am

Anyone else???Gotta be someone running a PWK on an LT?

Title: Re: 38mm PWK needle recommendation.
Post by: Rainman56 on September 14, 2016, 06:51:46 pm

Thanks for the input Canada:)....Anyone else run one on an LT250R??? Just trying to get some input so when I order my needle if I need to try some others I'll get them at the same time.

Title: Re: 38mm PWK needle recommendation.
Post by: Canada on September 13, 2016, 07:49:42 pm

I run a DGH in my TRX310r works great I also run that needle in m cy cr265r  +k2

Title: 38mm PWK needle recommendation.
Post by: Rainman56 on September 13, 2016, 04:36:30 pm

Gonna try a 38mm PWK airstryker carb on my 87 250 with V2's and Aaen pipe...Have found some starting jetting specs but no ideas on the needle...I know the DGH is a decent one of the 500,s but no idea on the 250,s...Anyone running or has run a Keihin 38mm PWK on a 250?....Runs ok but has a needle with markings and just a blue dot on top which I assume is a JD jetting kit.