Suzuki Quadracer HQ
LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: Canada on August 28, 2016, 12:51:46 pm
-
raptor 660 pegs are really close. el diablo: are those yfz pegs?
-
It didn't have any effect on my kicker travel. The part that bolts to the frame never changed, only the foot rest part
-
Just a qestion I just spent some time working on my Zilla, repainting some small things like the kick starter...
When I was doing this I noticed if lower the peg's the kicker might not clear. When kicking over my moto boot currently goes under the peg? I did the same mod on my trx250r and like it alot but on the 250r the kicker goes forward so no big deal.
I just want to make sure it will still have a long enough stroke to get this beast started +k2
-
First off this is a great forum +k2
Do you guys know if any other modern front bumpers are close to fitting on the quadzilla's?
Also the foot pegs I am looking for som lower and further back set pegs, I here maybe the rapter pegs are close?
Duncan Racing makes a pretty good looking front bumper.
As far as pegs go, I separated the foot peg part from the frame mount part and welded on Raptor pegs 1" lower & 1/2" further back. Really feels like a better setup than stock.
-
I've got a few sets of ims pegs that have been modded to fit the zills.
-
First off this is a great forum +k2
Do you guys know if any other modern front bumpers are close to fitting on the quadzilla's?
Also the foot pegs I am looking for som lower and further back set pegs, I here maybe the rapter pegs are close?
Also any other parts thet fit on these zilla's that would be sweet
Thanks