Suzuki Quadracer HQ

LT500R Quadracer => LT500 - General Discussion => Topic started by: Stpltn250r on August 20, 2016, 03:12:03 pm

Title: Re: Stock clutch thickness
Post by: Rainman56 on August 22, 2016, 09:36:16 am

My manual shows

Drive plate(fiber) .085" thickness.That,s right out of the Suzuki manual for the stock clutch.

Maybe someone can give you what the stack height of the clutch should be as well.

Title: Re: Stock clutch thickness
Post by: Stpltn250r on August 21, 2016, 07:51:14 am

Ok. It told me what the steel was. What's the fiber? I've looked online at Barnett and gave me a part number. Last digits of said are usually an indication of what thickness it is. That's the way it is for steels anyway. Does .100 sound about right for stock thickness fiber.

Side note Barnett sells cryo'd aluminum plates

Title: Re: Stock clutch thickness
Post by: Stpltn250r on August 21, 2016, 06:38:17 am

Well **** I forgot about that. Never mind I got a manual. ****. Thanks anyway

Title: Re: Stock clutch thickness
Post by: Rainman56 on August 21, 2016, 05:58:58 am

I can give ya the specs from the manual if you want?I do have some stock plates somewhere as well,though not sure how good they are.

Title: Stock clutch thickness
Post by: Stpltn250r on August 20, 2016, 03:12:03 pm

Anyone have a stock clutch laying around and care to measure the thickness of the fibers and steels? Preferably not an old worn out clutch set. Fairly new.