Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Knock10090 on July 12, 2016, 01:54:36 pm

Title: Re: 87 250 Rear Rotor
Post by: Knock10090 on July 13, 2016, 06:34:29 am

I'm going to attempt a rotor build. Thinking mild steel, CNC plasma cut, turned on a brake lathe to true it up. Powder coat inner portion of rotor! 

Title: Re: 87 250 Rear Rotor
Post by: ZillaFreak on July 13, 2016, 06:28:15 am

not 100%, but this should fit a 87, he could also design another style, look at all the banshee style ones.
http://www.jdscustoms.com/product/suzuki-lt250r-jds-iron-rhino-rear-rotor/

Title: Re: 87 250 Rear Rotor
Post by: Knock10090 on July 12, 2016, 07:04:07 pm

I have an LSR Axcalibar Rear axle.. I wonder if a banshee rotor hub would fit????  There are a TON of aftermarket rotors on eBay for like $45!!!

Title: Re: 87 250 Rear Rotor
Post by: Knock10090 on July 12, 2016, 06:08:11 pm

I'm thinking it would cut clean enough. Might have some dross to clean up. I know equivalent mild steel cuts real nice.

Title: Re: 87 250 Rear Rotor
Post by: Mr.Sampson on July 12, 2016, 03:11:23 pm

Will stainless cut clean enough? Iv always thought laser would be a better option... But let me know what you come up with and they do sell EBC drilled rotors and Iv got a saw blade looking one for my zilla ...

Title: 87 250 Rear Rotor
Post by: Knock10090 on July 12, 2016, 01:54:36 pm

Need to get a new rear rotor for my 87 250?  Is there a swap from another quad? OR should I make one on my CNC Plasma Table?