Suzuki Quadracer HQ
Classifieds / E Bay / Craigslist => Items Selling => Topic started by: All American on April 22, 2016, 06:42:56 pm
-
UPDATE;
I have the following for sale still.
85 86 straight seat all original in good shape
carrier assembly for 88 LT250R swingarm
88 front shocks
88 black rough foot pegs
silver Renthal handle bar with pad
88 LT250R upper A-arms and 1 lower left A-arm
88 gas tank (needs cleaned out)
88 radiator w/ hoses and cap
88 rear wheel hubs( short studs and long studs available for wheel spacers)
88 4-1 white wheel spacers
3 front hubs from either an 85,86, or an 88 LT250R
88 airbox w/ lid no boots
New NISSIN rear brake caliper with e-brake $135.00 new!!
1~4 bolt 85 or 86 rear wheel hub
88 tie rods w/ used ends
88 rear brake slave or master cylinder
88 rear brake line
both foot pegs for a Suzuki LT230E
88 LT250R frame, straight, no cracks, comes w/ lower steering stem bushing installed
88 motor mounts and bolts
88 rear suspension linkage arm and lever
88 bump steer mod pieces
88 front brake lines
85 or 86 LT250R swingarm w/ crack through swingarm pivot bolt guide, comes w/ rear brake stay arm
88 swingarm pivot bolt
2 gold handlebar clamps
water pump cover and housing for 85 or 86 LT250R
unknown axle locking nuts probably for 88
88 upper radiator mount
used but still good front sprocket, 12 tooth slightly worn
lastly I have a 64 oz. bottle of Maxima Castor 927 I opened and used 3 ozs, $30.00 shipped
Feel free to pm me any offers
Thanks for looking
P.S. I may be talked out of my 85 & 86 FMF torquey header pipe since I want a Kenny Roberts pipe😇
-
YES I still have the frame! Can ship via greyhound for just $200.00. It comes with the motor mounts, lower steering stem bushing, & the rear wishbone assembly!
And yes I still have that swingarm so I can take off the carrier if you need it still!
-
hate to bump old topics, but is the frame still for sale and straight? I just picked up a 88 250 project on the cheap but the frame is FUBAR
-
Im looking for the axle carrier. Do you have one for sale?
-
Do you have a rear master cylinder available? Just the master cylinder, don't need reservoir or foot lever. Thanks.
-
Send me your contact info for the swinger so I can get pics for you. Sorry it took so long to get back to you. I've been really busy logging my land. Once the logger gets into my very secluded northern area, I will have him haul out the walnut tree I found for that violin. I tried getting it out myself and ended up cutting my leg 3 times trying to get it out of the deep ravine it's in. That things heavy! MASSIVE. I should go down in there and get you guys a pic.
-
if you still have the swinger i would like to loo at some pics. from what i read i think it will work on my 85' with slight modifying.
-
I will take the air box and boot if you still have it
-
Sorry guys, I've been busy for a while. Now.... Who needs what? I know ElDiablo wants some walnut for his violin and I found it tonight. Somebody messaged me for a complete air box... I messaged you for your cell so I could send ya some pics... Anybody else?
-
What front shocks do you have?
I'm not sure if I ever responded to that message you posted, so I figure I should probably follow up and get you any info you want. Sorry and thanks for inquiring.
-
ChaosAD,.... Are you still wanting to know what handlebars I have? It seems to me that I'm a little late in getting back to you. Sorry about that. I can send you pics of my handle bars to your phone if you pm me your cell number. Also the rear hubs off my 88' have 2" wheel spacers. Hubs are nice and tight and has good paint. I can also send you pics of that also.
-
I'd be glad to send some pics to your cell phone..., just need your cell number. I just got a message from q2w on here about possibly having him fix it. I'm going to send him some pics and see if it can be repaired. If anybody can fix it, he can.
-
I'm am interested in your swinger if the cracks aren't real bad and the whole thing is still straight and still hold bearings, Can you send me some pictures ? maybe we could work something out .
-
What do you have for handle bars? Any pics of the bars and rear hubs with spacers?
-
The swinger I have is ****.
-
I need a nice 1989 swingarm , crack free , I live in Arlington, Washington State , Picture would be nice .
-
_^_
-
Pipe is gone but still got what's listed. Prices are still heavily discounted. I would rather have the money than watch these parts lay around.
-
I just want to let everybody know what happened. This selling parts stuff is hard for me to do cause of my head injuries & that makes my life very hard. What happened is, I sold GrkGuy a lot of new parts and gave him a rear shock for free. I put everything in a box just big enough to hold the rear shock, then I tossed in the a arm bearing kit and never put any packing in it. When GrkGuy received the package most of the loose bearings were gone along with the free rear shock. There was a long cut in the box. This was my fault and GrkGuy was very professional about it all. I appreciate how he handled it. What I learned is I need to do a better job packing and taping. I intend to reimburse part of his money or offer to send him some more parts for free. I'm letting everybody know this cause I'm not a shady guy or a crook. It was a learning experience. Sorry John, I will do better from here and I hope you let me make this right. And I learned to always get a tracking number. LOL
-
Seat is original with original covering. There is a hole on the back of it, with what looks to be dry cracking going on around the back of it. It is an 85 or 86 seat. The straight seat, not the t seat.
-
What's the seat look like
-
I also wanted to say thanks to those who are buying my parts. It has been slowly getting done, cause I'm stuck cleaning up my pasrtures. I try to jump on here as much as I can. Thanks for your guys patience. Going into town tomorrow to mail out 92lt250wannabe, and GrkGuy's parts. I hope you guys get exactly what you were wanting at an affordable price. Once I'm done selling 250 parts, I'm going to be selling my 87 LT230E parts.
-
I am interested in the new rear brake caliper and how much do you want for it?
I'm keeping the rear brake caliper until I find out if it will work on my 85' 250. If it doesn't fit, I'll contact you and see if you still want it. Thanks
-
Ok, pictures sent, pretty sure the buyer is taking the
Upper and lower a arm bearings kit
Throttle cable
Clutch cable
Front and rear brake pads
Inner and outer hub bearings and seals
PRM grab bar
Rear shock
Spindles
Steering stem
What's left
Air box w/ out lid
Front shocks
Front hubs with bearings and seals - minus the spindles
Tie rods with ends on them
Frame
Swing arm (complete w/ axle still installed)
Rear hubs w/ extended studs and 4-2" spacers
Gas tank w/ fuel peacock valve on it
Three handle bars
Radiator w/ upper and lower hoses & clamps & upper radiator mount included
Seat may be missing rubber pieces on the seat pan
Seat latch w/ 4 screws
FMF Fatty Gold Series header in good shape
Should have the front calipers w/ hoses mounted on them
Front brake lines
Rear brake pedal w/out anything attached to it
Rear brake cylinder that needs rebuilt
Light blue hood w/o the mesh grill
Three misc. rubber boots
Pair of foot pegs
85' or 86" front hubs complete minus spindles
I may have a couple rear brake fluid reservoirs but I think they are not in very good shape
Sand Shark 8 paddles on barely used aluminum rims(note front right rim has damage on bead lock and leaks air fast, however I believe it can be bent back into place)
May have another set of wheels up in barn attic
Well my brain is fried now, that's all I can think of.
-
I'm still in the process of sending the buyer all the pictures. He's mainly interested in new parts I think.
-
I am interested in the new rear brake caliper and how much do you want for it?
-
I just want to let everybody know that I'm talking to someone whos interested in buying ALOT of my parts. I have to send him pictures and then he will let me know what all he wants. Once I hear back from him, I'll let you guys know what I got left. If you already spoke for a part, don't worry cause I got everybody written down with what they spoke for. Thanks
-
What front shocks do you have?
-
I found another box of new parts! New axle bearings and seal, hub inner and outer bearings and seals, New rear brake pads, New Nissin rear brake caliper with parking brake, from what I can tell, there is 1 washer missing from the a arm kit, lower rear shock bearing kit.
-
I found more new parts. I've got a motion pro black clutch cable, and a black throttle cable. Make an offer
-
SOLD!!! How does $40 + ride sound? I don't care who you are, that's funny! LOL
-
Rear shock
-
I'm needing money right now, so I'm discounting parts, real cheap, come the first of the month that might change. If your needing parts of mine, now is the time to speak up. If you won't have the money till the first, I will work with you. Thanks
-
Did some looking around to get an idea of what I had left. No electrical except a tail light. All a arms, front hub assemblies with brake calipers and lines, shocks, entire swing arm assembly w/ axle, brake disc,...it's all there, I think rear hubs too, set of sand shark 8 paddle tires- on front and rear aluminum rims, 1 front rim has a little damage around the bead, gas tank, petcock valve, air box, handle bars, rear brake lever....rear brake cylinder....rear brake reservoir....rear brake lines, rear wheel 1" spacers, FMF Gold series header, radiator with hoses and upper radiator mount.
-
Pm me your address, how does $10 for the steering stem sound?
-
interested in steering stem.
-
Things are a little tight right now, so I figured it is probably time to try and sell some parts. I got an 88' 250 mostly disassembled, I don't have the motor and tranny...I've got the FMF Gold series header but no silencer, so feel free to ask me whatever your need and I'll see if I got it. As always I price my parts to members on here at a deep discount. You pay the shipping and I will do my best to remember to include a shipping receipt in your package. I am very busy working on my pastures but I'll try to check in every day. Thanks Nick