Suzuki Quadracer HQ

Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - General Discussion => Topic started by: whiskey1010 on February 24, 2016, 05:48:43 pm

Title: Re: How to build a hybrid frame?
Post by: whiskey1010 on February 29, 2016, 12:53:10 pm

would i use the zilla spindles and shocks or 250 spindles and shocks?

Title: Re: How to build a hybrid frame?
Post by: All American on February 28, 2016, 10:34:19 pm

Would zilla a arms work on the 85'&86'?

Title: Re: How to build a hybrid frame?
Post by: whiskey1010 on February 28, 2016, 05:59:59 pm

Awesome advise.  Didnt know about the zilla A arms.  How much longer does the swing arm need to be?

Title: Re: How to build a hybrid frame?
Post by: Kreidy818 on February 28, 2016, 04:59:43 pm

http://z15.invisionfree.com/LT250_LT500HQ/ar/t2045.htm    Here you go. good luck.

Title: Re: How to build a hybrid frame?
Post by: Kreidy818 on February 28, 2016, 04:58:03 pm

if you google lt250/500 hybrid (or something along those lines) you can find the text for the step by step process. unfortunately the pics are nowhere to be found

Title: Re: How to build a hybrid frame?
Post by: LT500Kid on February 28, 2016, 07:54:07 am

Shon from here had zilla arms on his hybrid! What's up john? Where's shon been too speaking of him. There's only 3 places you have to cut the 250 frame to get a 500 motor in it if I remember.

Title: Re: How to build a hybrid frame?
Post by: FX4Pitrone on February 28, 2016, 06:05:13 am

Who's this guy?!^^^^ where you been John? Good to see you around.....

Title: Re: How to build a hybrid frame?
Post by: GrkGuy on February 27, 2016, 08:55:25 pm

You can take Zilla stock a arms flip them upside down and almost
Bolt them on a stock 250 frame. You just need to cut 2 tabs off each side and weld back on. Cheapest set up you can do, gives you wide and forward a arms.
For 1/8 of te price of new stuff

Title: Re: How to build a hybrid frame?
Post by: Rainman56 on February 25, 2016, 09:06:17 pm

Click on the store link at the top of the home page.Then scroll down to S&B designs and you can purchase the hybrid mounts when/if ya need them.

Title: Re: How to build a hybrid frame?
Post by: whiskey1010 on February 25, 2016, 06:21:48 pm

Thanks a lot. I appreciate all the help. I know I need to get the hybrid motor mounts. I think a member here makes them. Then I guess I could figure it out from there.

Title: Re: How to build a hybrid frame?
Post by: All American on February 25, 2016, 03:50:47 am

I'm of no help but just had to say, I don't understand how people could chop on a qr frame. Lol. All kidding aside, I believe Carl Bartlett is building his own frame.  Not sure if it's a 250 or a 500 though.  Anyways here is a link....

http://www.suzukiquadracerhq.com/bartlett-racing/2015-weapon-x/

You might send him a personal message with your questions.  I know he's a busy dude but that's who I'd go to for help with anything.  He really knows his stuff about the 250's, not sure how much experience he has with zillas though.  But it never hurts to ask.

Title: Re: How to build a hybrid frame?
Post by: Rainman56 on February 24, 2016, 11:00:55 pm

That thread was on a different site.Unfortunately the pics are gone in the thread but you could read the info.I,m sure someone here must have some pics to help ya out as well.

http://z15.invisionfree.com/LT250_LT500HQ/index.php?showtopic=2045

Title: How to build a hybrid frame?
Post by: whiskey1010 on February 24, 2016, 05:48:43 pm

So after about 9 years im finally ready to start building my hybrid. I havent been on this site for a long time and there is a post that was a step by step guide on how to build a hybrid frame, I think it was posted by skully.  So I tried the search function and cant find it or anything that could help.  Does anyone have a link to the thread or to any other thread that would be helpful?