Suzuki Quadracer HQ
Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - General Discussion => Topic started by: Rainman56 on February 17, 2016, 10:24:52 am
-
I've had gpi and one of those worley ones.
Worley fit well,only had to bend the rad mount on stem down a bit.Fit great then.
GPI I just had to oval out the bolt holes just to line up.Other than that ,all good.
But i have heard of nightmare fitment issues with some people .Maybe i just got lucky?
-
Still curious if anyone has used an aftermarket radiator that fits well??? May be in the market for one but want to get something that fits properly.
-
Old thread......I forgot about this one.....The aluminum rad I had started seeping coolant shortly after...Anyone know of a brand that fits well for an 87 250?
-
I put one in a customers Raptor 660 for him. The fit sucked but worked good. Couldn't beat it for $70.
-
Sounds like the cheap banshee one. I had to "force" it mount, but it was nothing major and it worked great. Never leaked.
-
Where you able to get it mounted with a little tweaking?
Does it leak?
Ya a little tweaking but no signs of leaking and I think it will be good althought I haven,t run it yet as some of the quad is still in pieces.Worst case scenario I put the stocker back in but I think this will work fine.
-
Where you able to get it mounted with a little tweaking?
Does it leak?
-
Watch out though. The cheap ones on Ebay don't fit well
This was a used one but clean I picked up locally for $20.Not sure of the manufacturer but ya it took a bit to mount it in.Didn,t line up/fit good at all.
-
Watch out though. The cheap ones on Ebay don't fit well
-
Yes, a thicker radiator will cool at a higher rate. There is more surface area for the air to contact the fins on the radiator.
-
Do the aftermarket aluminum radiators cool any more efficiently than the stock rad?Just curious if anyone has ran one and noticed a difference?Any issues with fit.etc?