Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: 87zillaman on January 10, 2016, 05:12:23 pm

Title: Re: front end upgrade
Post by: 87zillaman on January 10, 2016, 07:59:33 pm

there has to be a spindle shaft that is like the zilla one the can be pressed in to the z400 spindle

Title: Re: front end upgrade
Post by: SuperNutt on January 10, 2016, 07:00:23 pm

I did a little research recently on this very thing.  I am no expert but I concluded that you have to have special a arms to run the z400 spindles.  And the z400 hubs will not directly fit a zilla spindle so I would assume that the zilla hubs will not fit a z400 spindle.  I think the camber would be way off or something from what I remember.  I thought about having special a arms built for the z400 spindles but from what I have read there really is no reduction in the terrible bump steer that these front ends have.  And metal tech only makes them in a +2 total width.  This thing is wide enough for me.  Hopefully this helps a little...

Title: front end upgrade
Post by: 87zillaman on January 10, 2016, 05:12:23 pm

hey every one hows it going. so ive been reading all the post on the z400 spindle upgrade and 450 calipers so my ? is can i use mu 87 oem a arms with the z400 spindle and will the 87 hub go on the z400 spindle i ask because i dont want to change my rims i have on my 500