Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Joelenway on October 15, 2015, 07:04:13 pm

Title: Re: burgard tie rods
Post by: 92lt250wannabe on December 15, 2015, 06:34:00 pm

Burgard is still around call Izzy here is the nymber - 717-225-6234

Otherwise like others said american star makes tie rods for +2 arms.

Title: Re: burgard tie rods
Post by: DaveRock330R on December 15, 2015, 06:24:34 pm

Call burgard cycle they still make stuff you might be able to get them made

Title: Re: burgard tie rods
Post by: Rogue1970 on October 16, 2015, 07:46:19 pm

I too have the American Star Pro-X w/ heim ends.

http://www.amstarmanufacturing.com/X-SeriesTieRods.html

You can get those in stock thru +4.

Title: Re: burgard tie rods
Post by: Joelenway on October 16, 2015, 05:32:29 pm

 D?

Title: Re: burgard tie rods
Post by: Joelenway on October 16, 2015, 05:29:21 pm

I have +2 burgard A arms. One of the tie rods bent.  Obviously the tie rods are not stock. I dont know what they are i just need to know what will work. Can i buy aftermarket and where

Title: Re: burgard tie rods
Post by: Glamisrider on October 16, 2015, 11:49:38 am

You can try Metal Tech in Glendale, AZ.  (623) 218-8368

I know they make a extended tie rod set up for the 500's for their 2+2 A-Arms that use the stock Ball Joints.

May be able to adapt or make you something.

Title: Re: burgard tie rods
Post by: Sublunacy on October 16, 2015, 08:09:37 am

i have american star tie rods with heim joints.  thats the only place you will find heim joints on my atv.........

they are stainless steel and they build them any length you need. im sure a phone call could get you some stock threaded and plus 2inch or whatefer to match your ball joints.

however like i was saying heim joints on the tie rod is an upgrade but i wouldnt use them any where else unless i had to. just my two cents

Title: burgard tie rods
Post by: Joelenway on October 15, 2015, 07:04:13 pm

Anyone know where I can get burgard tie rods or something that will work. Mine are 12.5 inches inside thread to inside thread. One of mine is bent I have new ends just need the tie rod thanks