Suzuki Quadracer HQ

LT250R Quadracer => LT250R - General Discussion => Topic started by: Rainman56 on September 30, 2015, 01:07:07 pm

Title: Re: Need part # for aluminum rear rotor hub.
Post by: Rainman56 on October 08, 2015, 04:44:51 am
Quote from: Rogue1970 on October 07, 2015, 10:16:56 pm
Hope you get it worked out.

Part is on order.Mine was grooved up baaaad where the seal rides and really don,t want to get dirt/moisture in my new bearing carrier.RAD dual row Carrier is installed just waiting for the hub so I can put the axle in.Should be good to go next week.

Thanks again for everyones help :)
Title: Re: Need part # for aluminum rear rotor hub.
Post by: Rogue1970 on October 07, 2015, 10:16:56 pm
Hope you get it worked out.
Title: Re: Need part # for aluminum rear rotor hub.
Post by: Rainman56 on October 01, 2015, 12:43:42 pm
Appreciate the info guys.I got mine off.Was pretty tight coming off.I talked to Durablue and they said I need to run a Durablue brake hub and the OE won,t work so I'll have to ante up and get one.Part # is qr250sp.
Title: Re: Need part # for aluminum rear rotor hub.
Post by: cworobec on October 01, 2015, 11:19:58 am
Well mine came off alright and is replaceable. I'll have to double check mine might be a lonestar axle.
Title: Re: Need part # for aluminum rear rotor hub.
Post by: Iceracer on October 01, 2015, 05:43:48 am
They come pressed on the Durablue axle and are generally not removable, they are peened on and retained by a circlip. THE 500 axle is a little different setup.
Title: Re: Need part # for aluminum rear rotor hub.
Post by: cworobec on September 30, 2015, 07:31:25 pm
You should be able to run a stock one. I ran a stock one on my durablue axle.
Title: Re: Need part # for aluminum rear rotor hub.
Post by: Rainman56 on September 30, 2015, 07:24:37 pm
The part I need is not listed.In that pic it looks like the hub is sold as part of the axle...I just checked and didn,t realize that my Durablue axle may need a Durablue brake hub...The Durablue hub only fits a Durablue axle so maybe the stock one won,t work?My hub is aluminum,pretty the stock ones are steel?

Here is the brake rotor hub I need on Durablue site...Expensive,especially with the difference in the Dollar up here:(
Just curious if anyone knows if a stock one would work or if I need to run a Durablue...
I can contact Durablue also.

http://www.durablue.com/uploads/images/thumbs/thumb_274__orig.jpg_resize100.jpg
Title: Re: Need part # for aluminum rear rotor hub.
Post by: Rogue1970 on September 30, 2015, 07:00:17 pm
1987 250R (H) model looks to be this one

http://www.partzilla.com/parts/search/Suzuki/ATV/1987/LT250R/REAR+WHEEL+%28MODEL+H-J-K-L-M-N%29/parts.html (http://www.partzilla.com/parts/search/Suzuki/ATV/1987/LT250R/REAR+WHEEL+%28MODEL+H-J-K-L-M-N%29/parts.html)

I think you are talking about part 12 / 69720-22A10 for $59 bucks... ouch.  If I have the right part for the right year, then you can use any brake caliper mount 87+ years.

Looking on ebay you can see it for less (used) (http://www.ebay.com/sch/i.html?_odkw=250r+brake+caliper+mount&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xlt250r+brake+caliper+mount+suzuki.TRS0&_nkw=lt250r+brake+caliper+mount+suzuki&_sacat=0)

Here is one for $18 shipped. (http://www.ebay.com/itm/B-1988-Suzuki-LT250R-LT-250R-Brake-Caliper-Mount-/310716038796?hash=item48581e7e8c&vxp=mtr)
Title: Need part # for aluminum rear rotor hub.
Post by: Rainman56 on September 30, 2015, 01:07:07 pm
Hoping to see if anyone has a part # for the aluminum hub that the rear brake rotor bolts to on an 87 LT250R?Mine is really chewed up and is seized solid on the steel axle.Likely have to cut it off.Finally getting around to installing that new RAD bearing carrier and thought I,d go over everything.New something else would come up,always does. :(

Also if anyone has a good used one I may be interested if I can,t find a new one.Told they are discontinued up here in Canada but maybe someone has some stock left over or they,re available in the US?

Any info is appreciated.