Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Engine => Topic started by: Duneatic70 on September 02, 2015, 09:39:40 pm

Title: Re: what do you think about oil at 1st start of new engine
Post by: Duneatic70 on September 09, 2015, 03:10:54 pm

Excellent thanks guys for your help!!!!!

Title: Re: what do you think about oil at 1st start of new engine
Post by: Glamisrider on September 09, 2015, 07:09:27 am

Quote from: ZillaFreak on September 03, 2015, 05:37:54 am

When ever I assembly an engine, I put assembly lube on all parts. Bearings, cylinder wall, anything that has moving parts and contact something. Don't put a lot, just a dab will go a long way.

X2 on this, I have a hair dye applicator bottle of 927 with a small tip that I put on/in all the top end stuff, rod bearings, piston, cylinder, etc.

Title: Re: what do you think about oil at 1st start of new engine
Post by: Duneatic70 on September 06, 2015, 10:15:40 am

Thank you for the information I appreciate it!!!!!!

Title: Re: what do you think about oil at 1st start of new engine
Post by: ZillaFreak on September 03, 2015, 05:37:54 am

As soon as your gas enters the engine, you should have oil going in there. That is if you premixed your gas.

When ever I assembly an engine, I put assembly lube on all parts. Bearings, cylinder wall, anything that has moving parts and contact something. Don't put a lot, just a dab will go a long way.

Title: what do you think about oil at 1st start of new engine
Post by: Duneatic70 on September 02, 2015, 09:39:40 pm

Curiosity about firing up engine after top end rebuild & if the bearings & all oil passages being dry or not dry due to sitting,  Is it possible to prelube engine before start up? Or not due to only top end being off & oil is still in bearings? How quick will oil pump push oil thru the engine at start up? Thanks for helping!