Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Engine => Topic started by: 87zillaman on August 25, 2015, 05:09:10 pm

Title: Re: clutch slipping i think
Post by: Rainman56 on August 28, 2015, 07:50:18 am

Definitely sounds like clutch slipping.Generally with higher the gear you go the more slippage you,ll get.

Title: Re: clutch slipping i think
Post by: Glamisrider on August 28, 2015, 06:29:52 am

If your plates are all within spec. (Spec can be found in the manual).

Get a set of 6 Barnett 85/86 lt250 springs and you'll be good to go up to 70 HP.

You can also run OEM 85/86 springs but there just a tad shorter and don't have as long of throw.

Title: Re: clutch slipping i think
Post by: 87zillaman on August 27, 2015, 03:33:02 pm

yes

Title: Re: clutch slipping i think
Post by: Rainman56 on August 26, 2015, 06:22:12 pm

Does it do it in 4th or 5th?

Title: clutch slipping i think
Post by: 87zillaman on August 25, 2015, 05:09:10 pm

ok so lt 500 when i shift into 3 and get on it. its all most like the clutch is slipping i think because it revs allmost like there is no load on the engine and its like its stops pulling hard. do you think it sounds like the clutches