Suzuki Quadracer HQ
Suzuki Conversions (Hybrids) => Hybrid - General Discussion => Topic started by: Rogue1970 on August 23, 2015, 10:50:48 pm
-
Rainman56 you were correct ,didnt really make much of a difference.
So made yam 450 calipers fit instead.Stops now
Nice...I know with mine the front brakes felt spongy so I ditched the rubber flex hoses and went with braided likes as well as switch to a newer master cylinder (450 one I think) as even after the rebuilding the original was still azz lol
Also sometimes when installing new brake pads they can't feel a tad spongy until they set in with the rotors.
-
Rainman56 you were correct ,didnt really make much of a difference.
So made yam 450 calipers fit instead.Stops now
-
You maybe correct .But figured there must be a reason why people opt for it?
Had to try it at least
-
I doubt you're going to see any better stopping power...Just my .02
-
Not true .I've just changed to a 2 line front brake instead of the usual 3 piece with 't' splitter.Hoping this adds better stopping power?
-
Nothing
Sent from my SM-G892A using Tapatalk
-
Andy ...now you have a new buyer which would be Rainman ;)
Enjoy the pipe buddy 8)
-
If was a Qv1 hybrid pipe .
I have a buyer sorry
-
Was your Q Pipe modded to fit your frame???If not will you be selling it?
-
Well I said I was done but we all know that never happens.
Got rid of the Q pipe as I ride trails .So Dynoport made me a slick looking custom pipe and silencer. Same volume as the Low Boy 500 pipe.
Should match the mild trail port engine better than the Q.(https://uploads.tapatalk-cdn.com/20201101/615e4ba32d439c323e9c5670f7901f0c.jpg)(https://uploads.tapatalk-cdn.com/20201101/046b867547e48addf9ab5188cf7fb301.jpg)(https://uploads.tapatalk-cdn.com/20201101/ec6bd6d748354f8fc88de34855ed4e5a.jpg)(https://uploads.tapatalk-cdn.com/20201101/bbbb25b60840c85c4aa58cbd39990a35.jpg)
Sent from my SM-G892A using Tapatalk
-
New wheels on mine .
Think I'm done with this now(https://uploads.tapatalk-cdn.com/20200426/c39b30a06ccb2b8ca1662b12124955df.jpg)
Sent from my SM-G892A using Tapatalk
-
Look forward to seeing you build come together
-
I'm going to start a new hybrid build I've had this on the self for years it's time to build it I'm going to pull the frame out tomorrow I'll start a build thread The frame is almost done got a few more mods to do
-
Nice job
-
Your quad is truly a bad ass machine. (Y)
-
All honda wheels now(https://uploads.tapatalk-cdn.com/20200209/6cb1a1cd540643aa3ab8b1ca90d6d355.jpg)
Sent from my SM-G892A using Tapatalk
-
Honda hubs a go!!(https://uploads.tapatalk-cdn.com/20200206/77303ab87adc8063c533325fe65273ad.jpg)
Sent from my SM-G892A using Tapatalk
-
Slowly changing over to honda pattern hubs so I can switch around tires on each quad(https://uploads.tapatalk-cdn.com/20200202/470a018b1b8261bb2f85b23c05d04a1c.jpg)
Sent from my SM-G892A using Tapatalk
-
Niiiiice. Swingers with round carriers look so much better than the big box carrier.
-
Changed out the stock swinger for this old JP I had laying around(https://uploads.tapatalk-cdn.com/20191116/aab8f624503f8717206e2ae13ecc18c0.jpg)
Sent from my SM-G892A using Tapatalk
-
Rode mine briefly a month ago at the local track to set up the front shocks...Walked past it a couple times since.
-
7 minutes closer to riding it!
-
I put the tie-rods on and got then adjusted somewhat close. Did about a whole 7 minutes of work lol.
-
Rode it!!!
-
Almost Dune time ****!
-
I walked past mine in storage the other day...lol
LOL. I walk by mine everyday as it sits in the garage. One of these days I'll be able to throw a leg over it and actually ride it. One of these days.
-
I walked past mine in storage the other day...lol
-
Looks great!
I just dragged a 91-92 frame from the grave,
I defintially have some questions, LOL.
-
I ordered a set of new brake rotor bolts. One step closer to having these 400ex hubs on and riding.
-
Funny ,I couldn't sleep last night thinking that same thing lol!!
-
Shame on you guys for cutting up your quads and stuffing the biggest 2 stroke in there you could! S~ :o [|] :'( P* P* P*
-
Thank you
-
Sexy build!
-
Thank you
-
Looking good Andy.
-
Pretty much finished it up today.Riding ,tweaking and tuning is all that left.(https://uploads.tapatalk-cdn.com/20180915/f07400a8acf26886e0c79c9778d55376.jpg)(https://uploads.tapatalk-cdn.com/20180915/53823107ba05092302410d7a68811487.jpg)(https://uploads.tapatalk-cdn.com/20180915/2d7a1738ee9cf24848aa44a1176ea35b.jpg)(https://uploads.tapatalk-cdn.com/20180915/7018ca43d7dfdceffa2a67ca3e078fd8.jpg)
Sent from my SM-G892A using Tapatalk
-
Not using the black wheels as the are all warped etc up .Got polished wheels going on now
-
Omg dude I don’t remember seeing pics of it! This may very well be my new all time favorite! Very nicely done! Wow!
Side note, try a black hood on it... I think it would totally set off w the black wheels
-
After spending the past few evening trouble shooting a weak irregular spark issue it's up and running.The end is in sight
Sent from my SM-G892A using Tapatalk
-
Yes.Its for a trx250r.
Just added a support mount to frame .
-
I'm liking the air filter mount. Did Arlen make it?
-
Started final assembly now.
Got a bit more done today.
It's tricky with the 91 92 frames.Not much room to fit things!!(https://uploads.tapatalk-cdn.com/20180601/32e3eb3db0966ac5e744b685e7d9489a.jpg)(https://uploads.tapatalk-cdn.com/20180601/9f263860556bce5a315c176539fc9fdd.jpg)(https://uploads.tapatalk-cdn.com/20180601/760b1bf7fafe55084812c4369775c7d3.jpg)
Sent from my SM-G892A using Tapatalk
-
For now yes.
Got a bit more done.
Sent from my SM-G892A using Tapatalk
(https://uploads.tapatalk-cdn.com/20171209/31712028679ec0ec470e9f2872683d8e.jpg)(https://uploads.tapatalk-cdn.com/20171209/60838dfd47e5d79e4702c8cde7258725.jpg)(https://uploads.tapatalk-cdn.com/20171209/2193f9be46124437edc9144ace462761.jpg)
Sent from my SM-G892A using Tapatalk
Got some white carbon plastic today.which was nice!
Sent from my SM-G892A using Tapatalk
(https://uploads.tapatalk-cdn.com/20180105/384e86845a002b10dd45b57f01ecc3b0.jpg)
Sent from my SM-G892A using Tapatalk
Found some spare time to decal it up today(https://uploads.tapatalk-cdn.com/20180212/185ed5e19e7d54d8b4c7af6836cfc5b0.jpg)(https://uploads.tapatalk-cdn.com/20180212/7eee5860140b83db306c292c4a2f99bf.jpg)(https://uploads.tapatalk-cdn.com/20180212/d553635fe5a572fffde656b120ddac78.jpg)
Sent from my SM-G892A using Tapatalk
It's a tight fit for sure!!!(https://uploads.tapatalk-cdn.com/20180224/cebcbd8e68ed9282285b79caa6770eae.jpg)
Sent from my SM-G892A using Tapatalk
Pretty much how it's going to be(https://uploads.tapatalk-cdn.com/20180225/a5d76a1ad9750ad96a5d081435afffa9.jpg)
Sent from my SM-G892A using Tapatalk
-
For now yes.
Got a bit more done.
Sent from my SM-G892A using Tapatalk
(https://uploads.tapatalk-cdn.com/20171209/31712028679ec0ec470e9f2872683d8e.jpg)(https://uploads.tapatalk-cdn.com/20171209/60838dfd47e5d79e4702c8cde7258725.jpg)(https://uploads.tapatalk-cdn.com/20171209/2193f9be46124437edc9144ace462761.jpg)
Sent from my SM-G892A using Tapatalk
Got some white carbon plastic today.which was nice!
Sent from my SM-G892A using Tapatalk
(https://uploads.tapatalk-cdn.com/20180105/384e86845a002b10dd45b57f01ecc3b0.jpg)
Sent from my SM-G892A using Tapatalk
Found some spare time to decal it up today(https://uploads.tapatalk-cdn.com/20180212/185ed5e19e7d54d8b4c7af6836cfc5b0.jpg)(https://uploads.tapatalk-cdn.com/20180212/7eee5860140b83db306c292c4a2f99bf.jpg)(https://uploads.tapatalk-cdn.com/20180212/d553635fe5a572fffde656b120ddac78.jpg)
Sent from my SM-G892A using Tapatalk
It's a tight fit for sure!!!(https://uploads.tapatalk-cdn.com/20180224/cebcbd8e68ed9282285b79caa6770eae.jpg)
Sent from my SM-G892A using Tapatalk
-
Looking good!
I installed new lower balljoints that'll accept 400ex spindles over the weekend. That's the most work I've done on my hybrid in months haha.
-
For now yes.
Got a bit more done.
Sent from my SM-G892A using Tapatalk
(https://uploads.tapatalk-cdn.com/20171209/31712028679ec0ec470e9f2872683d8e.jpg)(https://uploads.tapatalk-cdn.com/20171209/60838dfd47e5d79e4702c8cde7258725.jpg)(https://uploads.tapatalk-cdn.com/20171209/2193f9be46124437edc9144ace462761.jpg)
Sent from my SM-G892A using Tapatalk
Got some white carbon plastic today.which was nice!
Sent from my SM-G892A using Tapatalk
(https://uploads.tapatalk-cdn.com/20180105/384e86845a002b10dd45b57f01ecc3b0.jpg)
Sent from my SM-G892A using Tapatalk
Found some spare time to decal it up today(https://uploads.tapatalk-cdn.com/20180212/185ed5e19e7d54d8b4c7af6836cfc5b0.jpg)(https://uploads.tapatalk-cdn.com/20180212/7eee5860140b83db306c292c4a2f99bf.jpg)(https://uploads.tapatalk-cdn.com/20180212/d553635fe5a572fffde656b120ddac78.jpg)
Sent from my SM-G892A using Tapatalk
-
For now yes.
Got a bit more done.
Sent from my SM-G892A using Tapatalk
(https://uploads.tapatalk-cdn.com/20171209/31712028679ec0ec470e9f2872683d8e.jpg)(https://uploads.tapatalk-cdn.com/20171209/60838dfd47e5d79e4702c8cde7258725.jpg)(https://uploads.tapatalk-cdn.com/20171209/2193f9be46124437edc9144ace462761.jpg)
Sent from my SM-G892A using Tapatalk
Got some white carbon plastic today.which was nice!
Sent from my SM-G892A using Tapatalk
(https://uploads.tapatalk-cdn.com/20180105/384e86845a002b10dd45b57f01ecc3b0.jpg)
Sent from my SM-G892A using Tapatalk
-
For now yes.
Got a bit more done.
Sent from my SM-G892A using Tapatalk
(https://uploads.tapatalk-cdn.com/20171209/31712028679ec0ec470e9f2872683d8e.jpg)(https://uploads.tapatalk-cdn.com/20171209/60838dfd47e5d79e4702c8cde7258725.jpg)(https://uploads.tapatalk-cdn.com/20171209/2193f9be46124437edc9144ace462761.jpg)
Sent from my SM-G892A using Tapatalk
Got some white carbon plastic today.which was nice!
Sent from my SM-G892A using Tapatalk
-
For now yes.
Got a bit more done.
Sent from my SM-G892A using Tapatalk
(https://uploads.tapatalk-cdn.com/20171209/31712028679ec0ec470e9f2872683d8e.jpg)(https://uploads.tapatalk-cdn.com/20171209/60838dfd47e5d79e4702c8cde7258725.jpg)(https://uploads.tapatalk-cdn.com/20171209/2193f9be46124437edc9144ace462761.jpg)
Sent from my SM-G892A using Tapatalk
-
For now yes.
Got a bit more done.
Sent from my SM-G892A using Tapatalk
-
For now yes.
-
Thought I would start this type of thread where we can share little stuff we might of done to our quads.
Just starting my hybrid.(https://uploads.tapatalk-cdn.com/20171112/d8a70f8dc1db36564c6d73a2fa9d712a.jpg)
Sent from my SM-G892A using Tapatalk
YFZ450 front shocks?
-
Thanks.
Illusion blueberry is the color
Engine in (mostly)(https://uploads.tapatalk-cdn.com/20171118/ccc1dd11cfa136d607da8d814151e8e1.jpg)
Sent from my SM-G892A using Tapatalk
-
Thanks.
Illusion blueberry is the color
-
So clean! I like that color blue.
-
Thought I would start this type of thread where we can share little stuff we might of done to our quads.
Just starting my hybrid.(https://uploads.tapatalk-cdn.com/20171112/d8a70f8dc1db36564c6d73a2fa9d712a.jpg)
Sent from my SM-G892A using Tapatalk
-
lol, yep that one seems to get us all :D
-
I've done nothing, which is usually the problem lol.
-
Thought I would start this type of thread where we can share little stuff we might of done to our quads.