Suzuki Quadracer HQ
Classifieds / E Bay / Craigslist => Items Selling => Topic started by: cworobec on August 15, 2015, 08:17:47 pm
-
Yeah I have a rear master for sale
-
Do you happen to have a rear master cylinder for sale? Need to find a working one. Thanks.
-
Yeah I still have tranny's. Not sure if I was selling them or not anymore. If the price is right I could let it go.
-
I'm curious if you still have a 500 backcut tranny. If so, how much shipped?
-
Hey, I am interested in some parts for the quadzilla. I am wondering if you have any yellow plastics (front, rear, and the blue nose piece) and also if you have any works or elka shocks left? (if so do you have just the fronts or fronts +rear and what are you asking for them?)
-
I sent you a pm q2w.
-
The works rebuilt rear wasn't done recently. It is ride ready, just not a fresh rebuild. I'll figure out a price on both.
-
Interested in either a works rebuilt (rear) or elka. let me know.
-
I've got stock rear shocks. Some rebuilt by works with their valving etc and I've got a couple elkas I think in a box I'll have to look.
Hello,
I've got my fronts, but would be interested in an elka rear pending condition and price
Sent from my iPhone using Tapatalk
-
I've got stock rear shocks. Some rebuilt by works with their valving etc and I've got a couple elkas I think in a box I'll have to look.
-
What kind of rear shocks and prices?
-
I've got rear shocks and I've got transmissions and cranks.
-
cworobec has everything LT-500 you could dream of for real, the hard part is getting him to sell anything S~ S~ S~
-
Do you have any rear shocks?
-
Do you still have any 500 parts? I'm in need of a transmission and a junk crank that is rebuild able.
-
I don't have any 250 plastic all mine is for a 500. The new maeir stuff is sold as well.
-
Not sure I can afford it but thought I would ask...how much for the "New in bags yellow maier plastic front and rear" if you still have them.
Also, does the rear plastic work on a 1992?
-
325 plus shipping on the shocks.
-
Still have bottom ? How much for a complete 87 bottom
-
Just fronts no rear and IL have to dig them out for pics. They were ready to install and working fine when I put them away.
Ok,
How much you want for them ?
Sent from my iPhone using Tapatalk
-
Just fronts no rear and IL have to dig them out for pics. They were ready to install and working fine when I put them away.
-
I've still got a set of triple rates with rezzies and chrome springs.
Ok, I am interested. let me know how much ? Front only ? No rear ? And send me some pics as well. Do they need to be resealed be recharged ?
Thanks
Devon.
Heavyd442@yahoo.com
Sent from my iPhone using Tapatalk
-
I've still got a set of triple rates with rezzies and chrome springs.
-
It's a stock height stem.
Hello,
Any works shocks left ?
Sent from my iPhone using Tapatalk
-
It's a stock height stem.
-
What's the height measurements?
-
It doesn't come with 1,1/8 bar mount. It comes with 7/8s mount. And yes I can ship it and yes I take paypal. Price is plus shipping.
-
I'm look for a 1 1/8th bar mount. Is it a stock height?? I'm in mt so would you ship it an will you do paypal for payment??
-
Yeah I do have bar mounts. It's 200 plus the ride.
-
I'm interested in the 87 Lrs steering stem! Price and specs?? Also do you have the bar mount with it?
-
Do you have any steering knuckle arms (the little flat piece with three holes) in good condition? I need at least one, but I'll take two if you got a set. Preferably the beefier 88-90 version, but I'd take the 87 version if that's all you had. Thanks.
-
Yeah depending what you need.
-
Are you still selling parts?
-
how much would it run me to get a stock motor built? or maybe something pretty close to stock. a complete roller popped up in my area, minus engine, and exhaust. and was curious what it would run me to get a motor together. i can assemble it, as long as the parts are good.
-
Bump.
-
If you need anything pm me and we can work something out. I check in from time to time.
-
Registered just for your thread. Picked up a lt500r with some case damage around the swingarm mount. I would be interested in a motor or lower case for a 87.
For what its worth there hasnt been many posts in 2015 for any of the lt500r forums. Seems owners use other forums or just dont goto forums in general.
-
Well not much interest here so looks like everything's going to be hitting ebay when I get home.
-
+k2 sweet thanks
-
Hey buckeye for the chrome arms with chrome spindles I want 300. They have all new bearings in them and the spindles are pretty much brand new as well as the ball joints.
As far as price on ported cylinders it depends what you want big or small reed. I have some ported by Dr. Q as well they are hrd porting. And I have another large reed I bought of twin zilla. Port work is really nice and runs damn hard with awesome broad power. Pm me with what your after and we can discuss a price.
As for the works shocks I can get you pictures when I get home. Pm me and can I text them to you? I also have a stock set of shocks that were rebuilt by pep and are rechargeable now.
-
Hey, do you have any pictures of your works shocks? I'll pm you if that's ok with you....thanks
-
How much for ported cylinder? Also do you have a clutch cover for 89 250r?
-
Any bored out tm38's with good slides? Also how much for the chrome a arms and spindles?
-
I've also got a bunch of carbs and carb boots to sell as well if anyone is interested.
-
Yeah the majority of the cylinders are stock porting. I do have some that are ported as well.
-
Stock porting on all the cylinders?
-
Ok well I've got some good bottom ends and plenty of cylinders with lots of life left . Let me when you want something
-
Chris I'm mainly looking for a good bottom end and a top end that has some bores left. Would like to put together a motor for a spare or to potentially build a hybrid with down the road. If I buy anything it probably won't be till around tax time as the new baby is due in 10 days and I'm strapped for cash at the moment.
-
I just want let everyone know one more time that these are for the lt500r. I only have a few parts for the lt250r and no engine parts besides side covers.
-
Had some guys asking about 250 parts. The only 250 parts I have are some air boxes stator covers and fender braces, hubs, a seat, and some stock a arms and spindles.
-
The 87' parts caught my eye. I'm holding off on my build so I can buy rare parts. One day ill be glad I did. (Y) I just may very well buy an 87' purely for the dunes.
-
got any pics? I read some things I may want. ;D
Someone deciding to do a hybrid??
-
Let me know what you want and I'll get some pics when I get home. Buckeye let me know what you want for a motor and we can talk about a price pending what your after.
-
got any pics? I read some things I may want. ;D
-
Chris how much for a complete motor or enough to make a complete motor? And how much for the chemo a arms and spindles?
-
I also have a couple complete bottom ends as well.
-
They are oem baskets. I might have some billet ones I'll have to look through some boxes.
-
Are the clutch baskets billet or OEM?
-
Hey guys I'm probably going to be getting a bunch of stuff together and putting it up for sale if anyone's interested. Here is a list of parts that will be going:
3 or 4 88-90 cylinders
4-87 cylinders
Clutch baskets
Engine cases both 87 and 88-90
Works shocks a couple sets fronts and a couple rears
Stock shocks front and rear
Rear grab bar
New in bags yellow maier plastic front and rear
Oem axles
Oem front and rear hubs
Chrome 88-90 oem a arms
Show Chrome 88-90 spindles
Chrome foot pegs
Blue foot pegs
Like new oem bearing carrier
Chrome LSR steering stem for 87 chassis
Transmissions
Cranks
Stock radiators
Radiator hoses
Front rotor gaurds in great shape
HRD cylinder big reed with head and piston
May have a couple back cut transmissions
Engine cases with bearing inserts
If anyone needs anything on the list or needs anything else let me know I might have it. Tons of new and used miscellaneous parts