Suzuki Quadracer HQ
LT500R Quadracer => LT500R - Engine => Topic started by: 87zillaman on July 05, 2015, 03:34:36 pm
-
thanks man. do you think its the spring i put in. because last year it did not do this with old springs the i was running
-
Your clutch basket & hub are not separating properly.
Here's your fix:
http://www.suzukiquadracerhq.com/engine-13/trans-trouble/msg41404/?topicseen#msg41404
Read my previous post and click the link to the fiche so you understand what the issue is.
.....and instead of using type F we're now using Maxmia MTL-R
-
yes when its off with the clutch in it will go in neutral. and when its running it will not go in neutral.Im going to put the oem one back in and see if that makes a diff
-
it goes in when im moving /running but when i stop it wont go in neutral
When your stopped and motor is running (clutch pulled in) will it go in to neutral?
If not, when your stopped and running (clutch in), if you shut off the motor clutch still in does it then go in to neutral?
-
u probably have clutch adjusted to tight, adjust cable to pull clutch lever further to disengage clutch more 2c
-
it goes in when im moving /running but when i stop it wont go in neutral
-
it wont go into neutral its all new
When won't it go in to neutral?
Running not running, etc?
-
ok so i dad a clutch problem was hanging up but now it wont go into neutral its all new and i have 85 or 86 lt250 springs in it and im running 10w40 castor motorcycle oil