Suzuki Quadracer HQ
LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: Mitch Keller on October 26, 2012, 12:20:19 pm
-
i have a couple more sets, if anyone is interested in them. pm or email me.
Save a set for me!!!
-
i have a couple more sets, if anyone is interested in them. pm or email me.
-
Any chance you could install some chariot spikes and/or blades on these things?
I'm down for some dual use zombie killing hubs.
And run over walmart people...same thing.
-
Any chance you could install some chariot spikes and/or blades on these things?
I'm down for some dual use zombie killing hubs.
-
I need to get the set I bought from SBLT500R mounted on soon, having the hubs and the front hubs polished also.
-
Pm md s price too me likey!!!
-
HSD made them
-
Can You Dimple the Face or something? Doesnt LSR and Baldwin etc offer replacement hub caps?
-
You See Deebo If I tell you then every one will want to know, and I wont be that special one that only owns them >:D
Mine Mine Mine
-
How much for a pair?
-
Shawn, money sent for 1 pair, Thanks
When the heck are you going to open a store again??
-
shawns style cap would be alot machinist friendly and wouldnt nearly cost as much to machine.
-
2 piece would eliminate the need to drill and tap the hubs as some guys dont wanna bother with that. you would have to make like a washer to go behind the spindle nut and tap it to screw the cap on. i was rhinking of just making a drawing and having these cut on cnc.
-
O ring would be nice, but not necessary, I used a clear RTV silicone if for some reason the small screws ever backed out the cover would stay on.
Shawn I dont think they have to be that deep also. I measure mine when I get to the shop.
-
I remember now it was Tim, I believe they had a inside lip and oring so you removed the outer seal and it was still dust proof.
-
i dont own zilla hubs so kinda hard to make a set. i run z400 hubs/spindles on my bikes.
sorry about that, thought you had a zilla or 250, but i think the z400 hubs are the same, i have a set i'll dig them out and check. if i remeber right the bearings are the same, so they might have the same size hubs where these would mount.
why would they be 2 piece? just want to be more complicated! lol i still have to drill mounting holes in this one, and you will have to drill and tap the hubs.
-
And if I remember those are 2 piece covers that Mitch has, so you have to drill and tap the hub?
Correct.
-
And if I remember those are 2 piece covers that Mitch has, so you have to drill and tap the hub?
-
i dont own zilla hubs so kinda hard to make a set. i run z400 hubs/spindles on my bikes.
-
Lets do this....im in...we need a price
-
Shaun those are sweeeeett (Y) (Y) (Y) (Y) (Y)
-
Im down for set.
-
If these fit a LTZ400 front hub I will take a set for sure!!! Thats only if you are willing to make them..Thanks Jason
-
i felt ambitious. made one up, just gotta drill the mounting holes. took me an hour to make, went as fast as i could! ;D
my bench is a friging mess!
carl, i had some ideas for a few tecate parts way back when but never did anything. only part i made was a case saver.
(http://i22.photobucket.com/albums/b317/sblt/DSCN0444.jpg)
(http://i22.photobucket.com/albums/b317/sblt/DSCN0448.jpg)
(http://i22.photobucket.com/albums/b317/sblt/DSCN0449.jpg)
-
I have been going to do a set for myself. If I remember rite it was the guy who rode Brady /Fastrnrik bike. Can't think of his name had the Weiner dogs in his pictures.
Shawn we need to talk Tecate....
-
I would make 2 more sets...................You do take Paypal
-
not to sound like a jerk, but if you have a hub you can make these. you can figure out the measurments yourself. not that hard. you can see they have a step for little bolts to mount and just have to bore the inside out to clear the nut and cotterpin. not to hard if someone has some skill and a lathe. if i'm not doing anything tomorrow and with the storm, still have power, i'll make 2. if anything i'll put them on mine.
-
I will take pics and measurements.
-
could i have a few detailed pics
-
What do need to get some of these made? How much down ?
-
i could make these also. i made aluminum hub nuts for my bike instead of these look just as trick imo.
-
i remeber seeing those. i could make them, but i'd need the motivation! :)) be made by hand, no cnc here, so i couldn't spit them out in 5 minutes.
wasn't it lonestar who made them???
-
I'd be in for 8 of them!!
-
Like to get a few more sets made, anyone remember who made these way back when?
(http://i192.photobucket.com/albums/z183/erbe03/LT500/DSCF0650.jpg)