Suzuki Quadracer HQ
LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Joelenway on March 12, 2015, 02:29:44 pm
-
I have laegers +2 and pat has burgard +2.
Post a picture of your axle. A couple good pictures, it would be helpful to know the length from the end of spline to the other end.
-
now im confused... I thought you bought Laegers?
-
Patman and I chat via phone and he send me a pic of his burgard arms he has a wile back and they r the same as ur arms on your quad.
Denton was a race team from what I remember. Gary Denton raced. I am not positive if he had any products.
I wouldn't trust stickers in my opinion.
-
They are not laegers I do not think. The lower shock mount tube is not laeger style. Laegers has a different setup there. Like said before I think they r burgard. If you want some pictures to compare I have laegers and patman has burgards. We could post em up for you.
-
There were laeger stickers on the quad. Next is the rear axle is there such a thing as a Denton axle that's what the stickers say
-
xT@
-
The upper is from the tie rod ends for a vw.
-
Burgard. Upper is from a vw as mentioned and lower is stock.
-
I think they are burgard!! If you take out a bushing and sleeve and take a photo we can know for sure!!!
-
I don't nnow the arm type, but I do know that lower ball joint is stock. And most likely the upper is the same ball joint as a 1970 vw beetle tie rod end. You would have to measure the diameter of the thread and go to ur local auto store that has one of the vw beetle end in stock and measure that to make sure they r the same.
Your ball joint setup is exactly the same as my laegers. But I don't think those R laegers arms.
-
Another picture
-
Anyone?
-
can somebody tell me what kind these are I need new ball joints but I don't know what kind of a arms are