Suzuki Quadracer HQ

LT250R Quadracer => LT250R - General Discussion => Topic started by: QuadRacerZ on February 18, 2015, 11:47:27 pm

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on March 02, 2015, 09:16:43 pm

Bump This!

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on February 25, 2015, 03:44:48 pm

So its easily possible to do... Anyone else have info on this matter? Very interesting and may be an approach I take... If I cant find the right aftermarket A Arms for my quad that is.

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: Wannabemxrider on February 25, 2015, 03:14:53 pm

The full flights are threaded heim on the spindle side so you could change them out with regular ball joints, that would make them better. I haven't done the mod yet. Just started playing with it.

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: Wannabemxrider on February 25, 2015, 03:08:27 pm

I have a set of full flights that a friend of mine had and I tried to fit them. Wouldn't recommend full flights because the heim joint at the spidle wear out quick. The problems I saw were the rear arm on the top left side interfere with the expansion chamber. I have a dynoport so others might be fine. The other is the lower ball joint. The z 400 is a taper joint not straight. The camber can probably be adjusted pretty good with the threaded ball joints. The one thing with the full flights that helped with the mod was the inner heim joints on the frail side. You can shim them to fit. I measured the z 400 and the lt and they are very close to the same at the frame.

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on February 25, 2015, 02:30:54 pm

I just read a lot of forums with people saying that almost any aftermarket +2 A Arms for an LTZ400 will fit a 87-92 lt250r...

Anyone know anything about this?

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on February 24, 2015, 06:10:26 pm

So... No one has heard anything about UTV/DSC Bike shop front A Arms for this bike? I contacted them today and they said that the ones they make are to OEM specs, but are a negative rather than a positive bend to the A-Arm itself, thus eliminating the need for camber mod.

Need some info on this, cant find any reviews.

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on February 23, 2015, 07:53:19 pm

For how much?

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: Heminutt on February 23, 2015, 06:42:37 pm

Sorry quadracerz I sold them to patman

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on February 23, 2015, 05:43:10 pm

Having a very very hard time finding bushings for those burgards hemminut... I will let you know though.

Anyone ever hear anything about UTV A arms? They any good? I see them on Amazon

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: 92lt250wannabe on February 20, 2015, 06:37:18 pm

Yeah dude I gots me some laegers already on my 250.. Thinking of ways u could make them work for u.

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on February 20, 2015, 10:13:50 am

And just for the record l2wannabe I didnt expect for a second that you wanted to buy these out from under me... I was simply asking because if you had an extra set of bushings... I wanted to buy them from you.

Suzuki Die Hards.. Gotta stick together bro.

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on February 20, 2015, 10:02:10 am

Gotcha... Thanks for the info. How much does a set of bushings run for laegers? That is if they will fit the burgards.

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: 92lt250wannabe on February 20, 2015, 09:29:07 am

I was just trying to help u out qrZ.. I do not have a set of extra bushings no. But if the laegers would fit you can call them and get urself a set of bushings, and than u would have your a arms.

Burgard is no longer around from what I know. So if your trying to contact them I doubt you will get any response.

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on February 20, 2015, 09:25:24 am

If Laegers will... Do you happen to have a an extra pair?

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: 92lt250wannabe on February 19, 2015, 09:12:46 pm

Just out of curiosity will laegers bushings fit?

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: Heminutt on February 19, 2015, 06:20:26 pm

Yes +2 and stock ones wount fit

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on February 19, 2015, 04:24:36 pm

As the people that work at Burgard seem to be hard to get ahold of... I will need to look for some bushings and get back to you. Are they +2 or?
(I doubt the stock bushings will fit these A-Arms... Correct?)

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: Heminutt on February 19, 2015, 04:09:10 pm

Make offer

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on February 19, 2015, 01:25:48 pm

price?

Title: Re: Wanted Front A arms +1-2 92lt250r
Post by: Heminutt on February 19, 2015, 02:02:13 am

I have a set of Burgards but they nneed new bushings

Title: Wanted Front A arms +1-2 92lt250r
Post by: QuadRacerZ on February 18, 2015, 11:47:27 pm

Dont really care what brand. Post price... Thanks