Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: 2g00d4u on February 08, 2015, 07:23:52 pm

Title: Re: Ball joints for Extended A Arms
Post by: 2g00d4u on February 09, 2015, 09:17:51 pm

oh yea haha ill try the stockers and see about getting the VW tie rod ends tomorrow after work and post back here

Title: Re: Ball joints for Extended A Arms
Post by: LTZ-450 on February 09, 2015, 08:28:55 pm

read reply #3

Title: Re: Ball joints for Extended A Arms
Post by: 2g00d4u on February 09, 2015, 05:53:00 pm

The upper ID is 14mm and the lower ID is about 22mm, i guess it might be those vw tie rod ends for the uppers then, but what about the lower? Does this give any definite explanation for what brand these are?

Title: Re: Ball joints for Extended A Arms
Post by: 2g00d4u on February 09, 2015, 10:29:48 am

I heard about the vw tie rod ends too, but wouldnt they be all the same diameter threads? These ones need a different diameter for the upper and lower.

Title: Re: Ball joints for Extended A Arms
Post by: Patman13mia on February 09, 2015, 10:15:36 am

As for a arms they kinda look like burgard to me

Title: Re: Ball joints for Extended A Arms
Post by: 92lt250wannabe on February 09, 2015, 07:34:22 am

Laegers also sells ball joint for their arms. But are the beetle joints cheaper than 34$ a peice?

Title: Re: Ball joints for Extended A Arms
Post by: LTZ-450 on February 09, 2015, 03:17:40 am

try 70 VW Beetle right side outer tie rod end napa # ES419R thats what they are for Leagers arms and i think burgard also and stock Suzuki for lower a arms

Title: Re: Ball joints for Extended A Arms
Post by: Roach on February 08, 2015, 08:34:31 pm

i could be wrong but for some reason thats what im thinkin i read

Title: Re: Ball joints for Extended A Arms
Post by: Roach on February 08, 2015, 08:33:19 pm

i think i read a few years back that laegers used volkswagen rod ends. i just googled volkwagen rod end and they look like the ball joints i have on my laegers. not sure if yours are laegers but maybe that will give u a starting point.

Title: Ball joints for Extended A Arms
Post by: 2g00d4u on February 08, 2015, 07:23:52 pm

Hey guys I recently picked up these extended a arms from ebay nice and cheap and I need ball joints for them, the oem quadracer's do not look like they would fit as these ones are just circular tubes and the upper and lower are different diameters. I don't know where to look for them and I don't know what brand the a arms are, can someone please help   <1>

(http://i932.photobucket.com/albums/ad164/Polaris12685/aarms.jpg) (http://s932.photobucket.com/user/Polaris12685/media/aarms.jpg.html)