Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Engine => Topic started by: Gage garman on February 05, 2015, 05:36:12 pm

Title: Re: Clutch knocking/rattling
Post by: Gage garman on February 06, 2015, 09:10:53 am

It's kinda hard to put in neutral but it shifts perfect clutch doesn't slip at all it just made a rattle noise in neutral not a bad rattle I just noticed it about 1 week ago

Title: Re: Clutch knocking/rattling
Post by: Iceracer on February 06, 2015, 07:47:12 am

Are any of the plates broke, is the bearing bushing worn and loose is something like the return spring ratling around in there. did somome putthe thrust bearing for the pinion in backwards roller to the steel flat side against the pressure plate.
What does not worn that bad look like, no visible grooving, grooves you can feel are there teeth marks on the back side of the aluminum basket where the two gears mesh, does clutch drag, go into gear easily, hard to find neutral? need a better description

Title: Clutch knocking/rattling
Post by: Gage garman on February 05, 2015, 05:36:12 pm

I have a 250r and when it's at idle the clutch knocks/rattles what is it my clutch basket isn't worn that bad I looked at it  what could it be. Is it normal