Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: 87zillaman on February 02, 2015, 06:37:40 am

Title: Re: sprocket and brake rotor hubs ?
Post by: Glamisrider on February 02, 2015, 10:44:56 am

The will only fit on one way and be able to tighten up.

Put them on and see how they go.

Title: sprocket and brake rotor hubs ?
Post by: 87zillaman on February 02, 2015, 06:37:40 am

so putting axle assemble back together and noticed the hubs -flange are diff in the parts that slide in the seals. on one the splines are 1/4 in from end. the other its about 1/2 in from end which one goes where does the deeper on go on the side of the exle with the stopper which would be on the brake  side