Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Engine => Topic started by: Rossy on February 01, 2015, 03:01:19 pm

Title: Re: If you have an O ring head, can you please help
Post by: Mtsnieg on February 02, 2015, 04:28:45 pm

You're welcome. Glad I could help.

Title: Re: If you have an O ring head, can you please help
Post by: Rossy on February 02, 2015, 02:29:56 am

 +k2 Thanks Mtsnieg

Title: Re: If you have an O ring head, can you please help
Post by: Mtsnieg on February 01, 2015, 05:57:54 pm

I have a spare set I ggt from HPR when I had my head done. They measure just a C hair under .068".

Title: If you have an O ring head, can you please help
Post by: Rossy on February 01, 2015, 03:01:19 pm

I'm trying to find the correct thickness (diameter) O rings to buy for my 87 LT500R motor that is about to be cut for the rings. I've been to my local shop and they stock Viton rings ranging from 2.0mm to 2.5mm for the outer ring and 2.5mm to 3.0mm for the inner ring. If someone has some o rings lying around out of their quad, can you pleeeeeease measure their diameter for me....it would be hugely appreciated. Thanks.