Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: 87zillaman on January 31, 2015, 09:37:27 pm

Title: Re: installing axle in carrier
Post by: 87zillaman on February 01, 2015, 07:35:49 am

it is all clean down to metal then prime and paint and greased up it is snug no movement all new bearing and seals thanks

Title: Re: installing axle in carrier
Post by: RustBelt on February 01, 2015, 07:19:33 am

Should be snug but easy.make sure all dirt and corrosion is cleaned off the axle.

Title: Re: installing axle in carrier
Post by: Patman13mia on January 31, 2015, 11:00:57 pm

It should slide right in there!! Then you tighten it up to the swingarm itself!! Should be gtg

Title: installing axle in carrier
Post by: 87zillaman on January 31, 2015, 09:37:27 pm

so i just put new bearing and all in my rear carrier seals and all. when i put axle in should it go in tight or should it slid in new bearing easy