Suzuki Quadracer HQ
LT500R Quadracer => LT500R - Engine => Topic started by: Gaz on January 23, 2015, 06:01:55 pm
-
Yeah the chap was helpful. It's easy to get confused reading through these forums. Some people have said that they have ran their bikes without washers on the big end. How that is possible I have no idea. Hence I thought they must have been referring to thrust washers that space the rod in the big end - I didn't have those so I asked the question. Turns out my engine doesn't need splitting apart - thank God!
-
IceRacer answered it on FB, the small end thrust washers locate the rod on the bearings. All you need is the spacers on the big end.
-
Hi guys, not been on for a while. I've stumbled on some threads where people have discovered they had no thrust washers on the big end of their crank. I've recently had my crank rebuilt with a hot rods kit and there are no washers on the big end what so ever. They were not in the kit. Should they be included in the kit or are they not required? There are spacers between the crank webs and the big end bearing, but no washers to hold the con rod in place between the webs. The engine has been rebuilt from every nut, bolt and bearing including re-sleeving welding and machining. I've got billet aluminium thrust washers on the top end. Does this engine need tearing apart again before it's even took its first kick start - is it that critical?. I've spent hundreds on this motor. Can't believe they were not included in the kit and that the machine shop didn't pick this up, I'm so pissed off. Thanks in advance for your help.