Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Engine => Topic started by: 87zillaman on December 21, 2014, 02:54:09 pm

Title: Re: what reeds and y or no with torque spacer
Post by: PeeWee on December 29, 2014, 10:08:58 pm

pulling the cage back is used for more than just carb location issues. adding volume in the case is one reason a guy might use a spacer. another reason is plenty of cylinders have the boost port shrouded by the stoppers. un covering the boost is generally not a bad thing. whether or not you see any gain from a spacer is hard to say. alot of variables involved and without testing it would be  difficult to guess. im sure jerry hall is probly the only guy around here thats messed with this kind of stuff

Title: Re: what reeds and y or no with torque spacer
Post by: ZillaFreak on December 23, 2014, 09:50:51 am

torque spacers aka reed spacers are only needed when carb clearance is an issue.

Title: Re: what reeds and y or no with torque spacer
Post by: 87zillaman on December 21, 2014, 04:47:37 pm

ok i have seen pics does he still make them what are they going for

Title: Re: what reeds and y or no with torque spacer
Post by: LT500Kid on December 21, 2014, 04:29:33 pm

Spacer is no gain. Have jerry hall make you his v2 set up

Title: what reeds and y or no with torque spacer
Post by: 87zillaman on December 21, 2014, 02:54:09 pm

looking for help im just getting all my stuff for my build and was looking for some good advice on what to get