Suzuki Quadracer HQ

Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - General Discussion => Topic started by: PCS on December 18, 2014, 01:18:16 am

Title: Re: fuel tank pre filter
Post by: Mtsnieg on December 25, 2014, 10:03:51 am

You're welcome. Merry Christmas.

Title: Re: fuel tank pre filter
Post by: OldMan on December 24, 2014, 09:57:32 pm

Thanks!!! Merry Christmas!

Title: Re: fuel tank pre filter
Post by: Mtsnieg on December 24, 2014, 03:53:31 pm

OD of the threads on the tank is 2.665. ID of the opening is 2.190 with the sleave removed.

Title: Re: fuel tank pre filter
Post by: OldMan on December 23, 2014, 06:00:13 pm

Anyone?

Title: Re: fuel tank pre filter
Post by: OldMan on December 22, 2014, 02:00:31 pm

So my machine is in California and they want me to give them the measurements of the inside diameter of the gas tank hole and the outside diameter (cap off the outside threads).
Can anyone do this for me since I can get to mine?

Title: Re: fuel tank pre filter
Post by: FX4Pitrone on December 21, 2014, 06:39:06 pm

report back please if it fits thanks!

Title: Re: fuel tank pre filter
Post by: OldMan on December 21, 2014, 11:39:00 am

Well I ordered a Z400 one 2 day priority.
Hope it fits.
Hope it arrives by the 31st.

Title: Re: fuel tank pre filter
Post by: PCS on December 20, 2014, 11:08:09 pm

better ask for a fast ship  +k2

Title: Re: fuel tank pre filter
Post by: OldMan on December 18, 2014, 11:50:02 am

I was one of them.
No LT500r listed but the same as an LTZ400?
I need one for my January 5th trip, could be tight with the 1-2 week ship time.

Title: fuel tank pre filter
Post by: PCS on December 18, 2014, 01:18:16 am

a member was asking about fuel tank condoms...well here you go
http://www.qualitycycleparts.com/Profill_in_tank_fuel_pre_filters_starting_at_25_0_p/ultra-mk2.htm