Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Engine => Topic started by: SuperNutt on December 05, 2014, 07:06:36 pm

Title: Re: engine case inserts for swing arm bolt missing?
Post by: SuperNutt on December 08, 2014, 07:16:56 pm

I have another case here but it is still useable.  I will see if I can come up with a junk case and cut one out. That is a good idea.  A washer would probably work in a pinch too.  I might be able to make something like that if I had to.. Thanks for the replys..

Title: Re: engine case inserts for swing arm bolt missing?
Post by: Kreidy818 on December 08, 2014, 07:34:00 am

Find a junk case and cut it out with a dremel. That's what I had to do

Title: Re: engine case inserts for swing arm bolt missing?
Post by: GrkGuy on December 07, 2014, 08:13:36 pm

Just put a big washer on it. :)
Or send me the cases and I will.

Title: Re: engine case inserts for swing arm bolt missing?
Post by: SuperNutt on December 07, 2014, 05:56:45 pm

So basically this case half is junk then?  Or can someone maybe make a bushing for it?

Title: Re: engine case inserts for swing arm bolt missing?
Post by: Iceracer on December 07, 2014, 02:13:36 pm

They don't come out. Unless there f'ed up.

Title: Re: engine case inserts for swing arm bolt missing?
Post by: SuperNutt on December 06, 2014, 08:47:43 pm

I tried to get one out of a case I have laying around.  I warmed up the case on the wood stove and still couldnt budge the insert.  So I gave up.  I will have to figure something else out as the case that I want to use is the one that is missing the insert.  I tried a swing arm pivot bushing and that didn't fit.  SO if anyone has one laying around, let me know. I sure could use one....

Title: Re: engine case inserts for swing arm bolt missing?
Post by: Glamisrider on December 06, 2014, 07:01:46 pm

I didn't realize those where cast in to the cases., learn something new everyday.  +k2

Title: Re: engine case inserts for swing arm bolt missing?
Post by: Twinzilla on December 06, 2014, 04:32:44 pm

I don't believe they're available form Suzuki...you're going to have to have some made.

Title: Re: engine case inserts for swing arm bolt missing?
Post by: Iceracer on December 06, 2014, 03:15:29 pm

All the cases have a cast in piece for the swingarm to ride in.  Sometimes they come loose and come out.

Title: Re: engine case inserts for swing arm bolt missing?
Post by: Glamisrider on December 05, 2014, 08:52:24 pm

I think those are home made.

From the looks of it someone machined the cases and put swing arm spacer in there.

If I'm right they look like part #6 on the swing arm fiche.
http://www.suzukipartshouse.com/oemparts/a/suz/50d092b6f870022e9cc419f4/rear-swinging-arm-model-j-k-l



Lets see some pictures of the actual bushing and get some dimensions to confirm those are it.

Title: engine case inserts for swing arm bolt missing?
Post by: SuperNutt on December 05, 2014, 07:06:36 pm

Where can I find these engine case bushings for the swing arm bolt?  I don't see them listed on the suzuki parts diagram.  Some of my engine cases have them in them and some do not?  Any help or ideas would be appreciated.  Thanks.  (http://i937.photobucket.com/albums/ad218/bansoutty8/Forum%20pics/IMG_3056_zps6057e701.jpg) (http://s937.photobucket.com/user/bansoutty8/media/Forum%20pics/IMG_3056_zps6057e701.jpg.html)
(http://i937.photobucket.com/albums/ad218/bansoutty8/Forum%20pics/IMG_3057_zpse9470496.jpg) (http://s937.photobucket.com/user/bansoutty8/media/Forum%20pics/IMG_3057_zpse9470496.jpg.html)