Suzuki Quadracer HQ
LT250R Quadracer => LT250R - General Discussion => Topic started by: 716ltracer on July 27, 2014, 01:32:16 pm
-
Sorry wrong thread
-
Sounds to me like too much piston to wall clearance too
-
Mine has this identical sound as well. Under heavy load, it sounds like a grinding noise. I'd be interested in what the culprit would be. I was thinking rod bearing. Someone has to know what that awful noise is.
-
It sounds loose. I would remove the top end and check the piston clearance and the bore for wear.
-
And what do you think about the noise. Normal or no
-
Thanks rainman. Not really the computer type of person
-
http://youtu.be/0L11b-rtXKk
-
I posted a video on YouTube. Look up. 85 / 86 Suzuki lt250r. Posted by Dave m. Let me know what you think.
-
Can I post one here. Or would I have to do YouTube ?
-
We should be able to help. Post a video.
-
Just picked up a 85/86 lt250 and after some parts and tinkering I got it running and riding. But it has a engine noise. I'm new to the 2 strokes, so I'm not sure if it just me or if its bad. I was wondering if I post a video to YouTube if people could watch it and let me know what they think. Thanks in advance