Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Engine => Topic started by: Meaness1983 on July 22, 2014, 02:23:57 pm

Title: Re: electrical help.
Post by: Meaness1983 on July 23, 2014, 04:43:57 pm

Realized I unplugged one of the coil wires while installing the exhaust. I feel like a dummy. Plugged her up run it through a few heat cycles , recheck bolts,  She's running pretty dang good. Thanks for all your help

Title: Re: electrical help.
Post by: Rainman56 on July 23, 2014, 10:15:45 am

From Clymer manual

Title: Re: electrical help.
Post by: Meaness1983 on July 23, 2014, 03:36:41 am

I don't have one and plan on selling the atv after I get it fixed. Dont really want to spend the extra money on it. I was hoping some of these guys could help me out.

Title: Re: electrical help.
Post by: Deebo on July 22, 2014, 05:04:44 pm

If you can get a manual, all the specs are in there.

Title: electrical help.
Post by: Meaness1983 on July 22, 2014, 02:23:57 pm

Not sure if this has been covered so im going to ask. I need to know how to check my stator,  coil, cdi box with a multimeter. Im trying to track down a issue by process of elimination. Its an 1985 lt250r.  Im not sure how to do this as far as procedure and what ohm readings I should be seeing. Any help will be greatly appreciated.