Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Engine => Topic started by: 716ltracer on July 04, 2014, 07:45:00 pm

Title: Re: 87 LT250r clutch won't disengage after oil change
Post by: 716ltracer on July 05, 2014, 07:36:37 am

Never removed the cover.  It was fine for about 20 mins after oil change then it stoped  Drain plug was exact same length just oversized for stripped threads

Title: Re: 87 LT250r clutch won't disengage after oil change
Post by: GrkGuy on July 04, 2014, 10:07:48 pm

did you take clutch cover off or did p/o, if so he might have not put the arm back on right.
where is the clutch arm at now. if you are sitting on bike arm should be around 9 o'clock.

and make sure that the drain plug is not longer than the oem one. it will hit gear in motor and not let
it turn over.

Title: 87 LT250r clutch won't disengage after oil change
Post by: 716ltracer on July 04, 2014, 07:45:00 pm

I just got a 87 LT250r in a trade.   The previous owner lost the oil drain plug while riding because the threads were stripped  and out came all of the oil.   So I got a oversized oil drain plug from advance autoaand put in 10 40 motorcycle oil and the clutch was fine for a little bit but then all of a sudden the clutch wouldn't disengage.  Could this be because of using a different brand of oil from what was previously in it.     Any info would be greatly appreciated