Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Rainman56 on July 02, 2014, 07:30:37 am

Title: Re: 1987 LT250 Front Master Cylinder Upgrade/Interchange
Post by: Mitch Keller on July 03, 2014, 06:56:04 am

Z400 front master will work, just a note the thread pitch is different on the banjo bolt over the OEM 250/500 Master, the z 400 run anywhere from 30 -60 bucks just make sure you get the oem z 400 banjo.

If I recall the OEM LT500/250  Banjo is a 100 pitch where the Z400 is  125 pitch.
 

Title: Re: 1987 LT250 Front Master Cylinder Upgrade/Interchange
Post by: Rainman56 on July 03, 2014, 04:10:48 am

Keep me posted if you try it.

Title: Re: 1987 LT250 Front Master Cylinder Upgrade/Interchange
Post by: 250rider34 on July 02, 2014, 08:10:51 pm

I've heard z400. I will be trying one out soon

Title: 1987 LT250 Front Master Cylinder Upgrade/Interchange
Post by: Rainman56 on July 02, 2014, 07:30:37 am

Just curious what guys are replacing the front master cylinder with on LT250,s with.Anything a direct fit?