Suzuki Quadracer HQ

LT500R Quadracer => LT500 - General Discussion => Topic started by: Kreidy818 on May 24, 2014, 05:45:31 am

Title: Re: YFZ hubs
Post by: Dezsled on May 24, 2014, 09:02:40 pm

Tusk brand z400 extended hubs add width to the Zilla. Ltr450 fit and add 3/4" each side for 1 1/2" extra.

Title: Re: YFZ hubs
Post by: Quadzilla_NY on May 24, 2014, 07:24:14 pm

Z400 hubs are the same on the 500s

Title: Re: YFZ hubs
Post by: Iceracer on May 24, 2014, 06:50:37 pm

As long as you use a pre 88 axle in a 250 yes. Or get a Durablue conversion hub for a later.

Title: Re: YFZ hubs
Post by: Skeans1 on May 24, 2014, 05:58:53 pm

http://portland.craigslist.org/clc/mcy/4474737178.html

Title: Re: YFZ hubs
Post by: Kreidy818 on May 24, 2014, 05:25:43 pm

Found out YFZ is 24 spline😞

Title: Re: YFZ hubs
Post by: Deebo on May 24, 2014, 02:12:12 pm

I was close. Haha

Title: Re: YFZ hubs
Post by: Buckeye513 on May 24, 2014, 11:30:36 am

Deebo 87+ 250's and 500's are 26 spline.

Title: Re: YFZ hubs
Post by: Deebo on May 24, 2014, 07:19:48 am

Long as the spine count on the axle is the same as the hubs.  If I recall correctly, some of the earlier 250s have lower spine counts than the newer 250s and 500s.  24 vs 28

Title: YFZ hubs
Post by: Kreidy818 on May 24, 2014, 05:45:31 am

Will the YFZ hubs work on the LT's axle ? Just bought a bunch of used flat track tires on YFZ rims and would love to not have to buy new rims.