Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Engine => Topic started by: Michaelaphelan on February 26, 2014, 05:57:56 pm

Title: Re: cylinder
Post by: Mgty3Whlr on August 10, 2014, 08:19:06 am

What year is it?

88-92 years motors, you can use a Polaris watercraft piston to get another bore out of it.

However, the piston sits 1mm taller.
So, you have to run 2 or 3 base gaskets for clearance.

Joe

Title: Re: cylinder
Post by: Michaelaphelan on February 26, 2014, 07:02:01 pm

0k thanks heminutt

Title: Re: cylinder
Post by: Heminutt on February 26, 2014, 06:49:56 pm

On a 87 up 250 69.00 mm is the last size and it makes it 254cc

Title: Re: cylinder
Post by: Michaelaphelan on February 26, 2014, 06:49:41 pm

yeah sorry signed out 250 is correct

Title: Re: cylinder
Post by: Buckeye513 on February 26, 2014, 06:28:28 pm

Two fiddy heme at least that's what section it's in.

Title: Re: cylinder
Post by: Heminutt on February 26, 2014, 06:13:48 pm

250 or 500

Title: cylinder
Post by: Michaelaphelan on February 26, 2014, 05:57:56 pm

so i was told my jug could not be bored again it has to be sleeved next time , what would that be bored to and what cc would it then be?