Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: Hawaiiysr on February 19, 2014, 11:04:28 pm

Title: Re: Z400 pegs fit what?
Post by: Dezsled on February 20, 2014, 10:47:32 am

I'd like to go with the trx450 roll pegs. The 660 raptor roll pegs are mounted alittle to tall

Title: Re: Z400 pegs fit what?
Post by: Q2W on February 20, 2014, 10:17:39 am

Quote from: SamBoneLT500 on February 20, 2014, 07:33:41 am

Quote from: Q2W on February 20, 2014, 07:27:39 am

Try the honda 450rs.  With just a little mods they bolt right up and are flat.

What do you have to do to them as far as mods and are they any lower??

Yes, much lower.   PM alkyzilla.  He makes them ready to bolt up to the zilla.  They are made from roll designs and are twice as wide too.  Love them!

Title: Re: Z400 pegs fit what?
Post by: Dutch_Rutter on February 20, 2014, 10:09:47 am

I do like the LTR pegs, even though they are pitched forward, I porbably dont have many options for my 250 though do I? just getting the cutom made ones.

Title: Re: Z400 pegs fit what?
Post by: Hawaiiysr on February 20, 2014, 09:01:21 am

I have roll design pegs for a Z400. I thought with minor mods these would fit a Zilla. I want to sell the pegs. Just thought I would ask before I started a for sale tread.

Title: Re: Z400 pegs fit what?
Post by: Buckeye513 on February 20, 2014, 08:10:26 am

Anything you run other then oem Zilla pegs will be lower.

Title: Re: Z400 pegs fit what?
Post by: SamBoneLT500 on February 20, 2014, 07:33:41 am

Quote from: Q2W on February 20, 2014, 07:27:39 am

Try the honda 450rs.  With just a little mods they bolt right up and are flat.

What do you have to do to them as far as mods and are they any lower??

Title: Re: Z400 pegs fit what?
Post by: Q2W on February 20, 2014, 07:27:39 am

Try the honda 450rs.  With just a little mods they bolt right up and are flat.

Title: Re: Z400 pegs fit what?
Post by: Buckeye513 on February 20, 2014, 07:16:43 am

I have LTR pegs on my Zilla. They tilt slightly forward and require a spacer and longer bolts on the kicker side to clear the brake lever. Mount holes need drilled about a mm.

(http://i1298.photobucket.com/albums/ag57/Buckeye513/0F00D92D-753F-46CB-AF00-AC6242947259_zpskqbpqpmj.jpg) (http://s1298.photobucket.com/user/Buckeye513/media/0F00D92D-753F-46CB-AF00-AC6242947259_zpskqbpqpmj.jpg.html)

(http://i1298.photobucket.com/albums/ag57/Buckeye513/71DA1FA5-FF9B-4386-B01A-4B34E73CA5C5_zpsfuvlt2af.jpg) (http://s1298.photobucket.com/user/Buckeye513/media/71DA1FA5-FF9B-4386-B01A-4B34E73CA5C5_zpsfuvlt2af.jpg.html)

Title: Z400 pegs fit what?
Post by: Hawaiiysr on February 19, 2014, 11:04:28 pm

I recall something about Z400 pegs bolting up to a Zilla chassis? Or fits with minor mods. Please fill me in. Searching  didn't turn up much