Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Dutch_Rutter on February 03, 2014, 03:55:40 pm

Title: Re: Play in the rear end?
Post by: Dezsled on February 04, 2014, 09:19:51 am

Heres a break down, not sure of the part your describing.....

http://partstream.arinet.com/Mobile/fhVC_b3PCFHHSdJH6-tUnM8iJ8ZlvLX5ew770YQlJEGh11rhy3UCKB3ZOMYSaEyl6S3C80iyCDBTVZDnjUQcF3Ow42B6HYRhboziKiKu6Q5lGaTJjgndPVkfWtY8ggxz0.html#/Mobile/2i3esvi_J4GMMAyOe7dXTdJknfQ7Yh3ZDyLnCx88_GX7evqoLDl95P7yVJUo7Ds7JCQwwuWFcDiik3nUV_KsyMADusK7zxIk_TC7BMR_igM1.html

Title: Re: Play in the rear end?
Post by: Dutch_Rutter on February 04, 2014, 08:17:03 am

I'll have to check it over when this work week is over.

When I took the motor out I was kinda suprised that there was only two rubber bushings between the motor and the swinger arm sides. Is that really all there is or am I missing something?

Title: Re: Play in the rear end?
Post by: LT250RWV on February 04, 2014, 12:02:31 am

Yea could be. Check swingarm  bolt excesses wear  and bearings.   But it could just need everything bolts ed together to.

Title: Play in the rear end?
Post by: Dutch_Rutter on February 03, 2014, 03:55:40 pm

I just replaced the my stock rear shock with a newly rebuilt one that I replaced the bearings in, in an attempt to remove some of the obsessive play in the rear end, I had trouble getting the two metal spacers in place on the bottom of the shock, it seems as though the mounting point was bent at some point. Should I try to straighten this out so I can fit them? or are they not a big deal?

Also there is less play but still not all of it is gone, when I pull up on the grab bar I see the main movemnt between the swinger bolt and frame, Currently I do not have the motor in place or the swinger bolt tightened, Could this be causeing it?