Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Engine => Topic started by: CorrecCraftFanatic82 on January 26, 2014, 08:57:34 pm

Title: Re: Iceracer here's the cylinder
Post by: CorrecCraftFanatic82 on February 06, 2014, 09:30:34 am

The cylinder was ported, the intake was ported , problly too much as my guess, it is ****, if I ride long enough u can see the dirt build up in that area.

Title: Re: Iceracer here's the cylinder
Post by: Iceracer on February 04, 2014, 09:37:30 am

It's easily weldable if it's actually a crack. And don't use paint stripper or brake cleaners to remove the paint. It will cause a gas called phosgene that's very toxic when welding.
Problem is why did it crack sk mtbkngs not flat or all thE gasket was not removed.

Title: Re: Iceracer here's the cylinder
Post by: LTman on February 04, 2014, 04:32:25 am

remove the paint then recheak   it

Title: Re: Iceracer here's the cylinder
Post by: CorrecCraftFanatic82 on January 26, 2014, 10:46:22 pm

Thanks stpltn250, I was gunna use a black felt pen ....... But u did it better thanks man

Title: Re: Iceracer here's the cylinder
Post by: Stpltn250r on January 26, 2014, 10:12:29 pm

here you go

Title: Iceracer here's the cylinder
Post by: CorrecCraftFanatic82 on January 26, 2014, 08:57:34 pm

The crack is very small, mite even be hard to see, it looks like a lightening bolt.