Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Engine => Topic started by: Bmcg1313 on January 21, 2014, 01:23:15 pm

Title: Re: Should I get a new cylinder
Post by: Iceracer on January 22, 2014, 08:21:09 am

Back one of the bolts out and thread the nut from one of the studs on it. If it goes on tight your Ok.  The studs are a 8x1.25 metric thread

Title: Re: Should I get a new cylinder
Post by: MD2smoker on January 22, 2014, 06:09:46 am

Any oem parts supplier should be able to get them. You could also pull
One of the good studs and check to see if it fits in the empty holes in the cylinder.

Title: Re: Should I get a new cylinder
Post by: Bmcg1313 on January 21, 2014, 06:47:58 pm

Where can I get some of studs and how will I know if they will fit into the holes that are there

Title: Re: Should I get a new cylinder
Post by: LT250RWV on January 21, 2014, 03:27:43 pm

Agree with Grk and use oem headgasket.

Title: Re: Should I get a new cylinder
Post by: GrkGuy on January 21, 2014, 02:37:00 pm

just put the oem studs back in it.

Title: Re: Should I get a new cylinder
Post by: Bmcg1313 on January 21, 2014, 01:52:17 pm

Also if you think I am still good to use it what would you recommend for a full top end gasket kit

Title: Should I get a new cylinder
Post by: Bmcg1313 on January 21, 2014, 01:23:15 pm

So I just bought my lt250r yesterday and ran into one issue which Lt250RWV helped me sort out quickly I have a new question now is it okay that 3 of the head studs were removed and taped to use bolts instead can I run it like this or should I look into a new cylinder