Suzuki Quadracer HQ

LT250R Quadracer => LT250R - General Discussion => Topic started by: Everts5299 on January 15, 2014, 05:44:59 pm

Title: Re: 5 to 4 bolt rear hub switch? any help
Post by: Dwilkins126 on January 16, 2014, 05:29:17 am

I am using Z400 Hubs on my 90 with the stock tires & rims as well for a perfect fit.

Title: Re: 5 to 4 bolt rear hub switch? any help
Post by: PCS on January 15, 2014, 08:31:56 pm

all 26 spline hubs will swap, lt250/500 ltr 450 and ltz400(kfx/dvx400.) if you have an 88, you likely have a 26 spline axle. el diablo, member here, is running tusk ltz400 alum hubs on his 250. the ltr hubs will widen the rear end over the ltz400 but both have the same honda pattern.

Title: Re: 5 to 4 bolt rear hub switch? any help
Post by: LT250RWV on January 15, 2014, 07:57:27 pm

Banshee hubs will fit on 24 spline axle.

Title: Re: 5 to 4 bolt rear hub switch? any help
Post by: Dezsled on January 15, 2014, 07:14:08 pm

26 spline

Some lt250 used 24

Title: Re: 5 to 4 bolt rear hub switch? any help
Post by: Everts5299 on January 15, 2014, 06:36:40 pm

Do you know how many splines are on the 450s hub?

Title: Re: 5 to 4 bolt rear hub switch? any help
Post by: Dezsled on January 15, 2014, 06:24:01 pm

Sir reed I believe you are correct for the Zilla. I'm not sure if there's a thread about this going now for the 250...

The Zilla can also use LTR450 rear hubs and gain an extra .75" on each side.

Title: Re: 5 to 4 bolt rear hub switch? any help
Post by: Sirreed on January 15, 2014, 06:08:57 pm

Ill most likely be corrected but I read (someplace) that the Suzuk Lt400 hubs fit on the stock axle. If I am wrong I am sorry.  D? D?

Title: 5 to 4 bolt rear hub switch? any help
Post by: Everts5299 on January 15, 2014, 05:44:59 pm

I need some help finding a direct fit four bolt rear hub. I have an 88 LT250R (model j). Trying to get rod of the 5 bolt hub <1>