Suzuki Quadracer HQ

LT250R Quadracer => LT250R - General Discussion => Topic started by: Durby on January 05, 2014, 06:08:27 pm

Title: Re: Kill Switch
Post by: Nopick on January 05, 2014, 09:12:17 pm

I had a solder joint pop loose on a kill switch. Re-soldered and it was good to go.

Pop the switch open and take a look.

Title: Re: Kill Switch
Post by: 87LT250RBoy on January 05, 2014, 06:38:45 pm

Check your grounds or the internals of the kill switch could be shot.

Title: Kill Switch
Post by: Durby on January 05, 2014, 06:08:27 pm

The Kill switch on my 88 LT250R does not work.  What wires do I need to look at to try and figure out if my switch is bad or if the problem is something else.  The bike runs great and I have just been using the key as the kill switch.  Lights work fine as well.