Suzuki Quadracer HQ
Classifieds / E Bay / Craigslist => Items Selling => Topic started by: Serg500 on December 03, 2013, 11:27:10 am
-
did you see the pics i posted last time i was on here i don't know if it would help. i think I'm just going to buy some trx spindles and see what happens.
-
On the '86-7 trx250r spindles the arm the tie rod end mounts to is lower than '88-9 trx250r and 400ex spindles. Something else to think about P*
-
The right spindle is mounted on the opposite side and vise versa in the pic I posted. I'd like to see the steering shaft with the flag/tie rod mounting tab off the front, can you post a pic serg? That would be a pretty rare part P*
-
i hate to bring this old post back up but a few of you guys told me these spindles on my leager are honda 250r spindles. if you look at a honda the tie rod is in the back and the pic that was posted from the magazine show the tie rod in the front.
-
That's but I'm thinking about running the 400ex spindles
-
Here ya go
http://www.ebay.com/itm/TRX250R-OEM-FRONT-SPINDLES-TRX-250R-FOURTRAX-HONDA-1986-1987-86-87-GOLD-/121235713184?pt=Motors_ATV_Parts_Accessories&hash=item1c3a362ca0&vxp=mtr
-
It stem has it off the front I have the leager stem that came with it. I just need some spindles I have the tie rods also.
-
Serge you just need to send it up here to me Ill sort it all out for ya. ....lol Ok seriously.
Does the steering stem have the pitman off the front and stop on the rear? That don't look Like reverse setup, not saying it isn't. Mount up the other side and lets see where the lines are you may be able to run a standard Honda stem. You will need Honda Spindles though. 400ex will work, there a really common swap in the R world.
Lets get this thing sorted out so you can ride it you been starring at it for what 3 years now?
-
Sweet front ends
(Y)
-
2 more
-
Here's some pics
-
Dezsled I don't have spindles or the tie rods on it, it's just like that pic you posted.
Alkyzilla that' Exactly what I expected to do but I need one of your motors and pipe....lol
-
ATVMXR yes this is that leager and the tie rods do mount in the front. So I'm probably stuck with this front end.
Dezsled the bump stop is on the other side I don't remember what side but I know it's different then my tl250.
Ice racer I was thinking the same about these tie rods being in the front.
Oh come on Serg..Racer........That just means you have to stay way out in front.
-
How about a pic of your front end?
-
ATVMXR yes this is that leager and the tie rods do mount in the front. So I'm probably stuck with this front end.
Dezsled the bump stop is on the other side I don't remember what side but I know it's different then my tl250.
Ice racer I was thinking the same about these tie rods being in the front.
-
Take one shot to the front side from a tire and your out of the race. It was a bad idea for track racing, zero protection.
-
Serg does your steering stem have the tie rod mount tab fore or aft /front or back on your stem?
That pic is from the late '80s when racers were looking for any latest trick to improve performance or handling..... Wonder why no one runs anything like that now?
-
serg, is this the same laeger you had a couple years ago that you showed me in person? I dont remember the tie rods being in front like that. I would say thats pretty damn rare if so. the spindles in the pic look to be the TRX250r from 1986/1987. probably before leager developed T-pin spindles.
me personally, I wouldnt go f'ing around trying all sorts of spindle conversion - with those tie rods in the front like that who knows what would happen to the steering geometry. it shouldnt be too difficult to source some 86/87 TRX spindles, hubs, etc. let me know if you need help
-
Cool thanks
-
Getting the parts to work correctly might take some work, but I know a spindle swap can be done.
I went to suzuki central site and got used spindles hubs rotors yfz450 calipers steel lines off one member for $107
-
You posted that pic do you think I can use z400 spindles
-
You might try z400 spindles/hubs/brake discs.... Lighter, rims easier to find 4x144, you can use yfz450 dual piston brake calipers
On my Zilla they reduce bump steer
-
I need some for my leager, but it's suppose to be all Suzuki. I was looking at it last night and if I put the The right side on the left side And the left side on the right side it might work. I have the hubs and I believe there Suzuki, I'm going to look at the breaks also. I don't know much about honda spindles can Suzuki hubs and breaks work on it.
-
Serg I have some stock honda250r spindles like that if you re looking....
-
Looks like it
-
Is that a stock spindle
-
That is Exactly what my leager front end looks like. Now I need spindles like that FML
-
Here's some '86-7 trx250r spindles on a laeger lt250
(http://i83.photobucket.com/albums/j300/Dezsled/bd88f13d35251e816eb3686e4fadcb10.jpg)
-
I was just reading on the 3 wheeler forum that a guy used honda a arms on his lt back in the 90s and he used zuki ball joints and spindles ect.
-
I was reading on 250r. Net or somewhere that Zuki arms fit on a Rhonda? They look like they would bolt right on.
-
No problem at all. Glad it went so quickly for ya. If I had a t-pin front end, we wouldn't have had to post it at all, LOL.
-
Wouldn't think you'd have toomuch trouble gettin rid of t-pin parts
+k2
-
These are sold thanks a lot Scawn your a good dude +k2
-
You can try trx250r.net as well. That site has been around quite a bit longer and most members of .org are also on .net. Would save you the hassle. Heck, if you want I'll post them up for you at .net since I'm an admin there. Just PM me the info you want posted.
-
I have them on everything2stroke.com but ill try that other site. Thanks
-
The suggestion to post the a arms on trx250r.org is a good one. Those a arms have a better chance to be sold on a 250r site rather than on a Quadracer site.
-
Ok ok will Somebody buy these
-
At the spindle and the ball joints where they traditionally go. T-pin a arms were the front suspension to have in mx back when the 250r ruled.
-
I would if I had a protrax front end to go with it! I'd prob have to take out a second mortgage to buy the rest of the set up if I could even find them! Post this up on trx250r.org. I'm sure a couple guys would be all over these at that price!
-
What do you mean everything is different, at the frame or the spindle?
-
Is that the T-pin set up?
I didn't even catch the lower a-arm is for a t-pin but you are correct. A buddy of mine just sold a t-pin setup a couple months ago. That's exactly what these are for.
-
I don't know if these are T-pin, I know I wanted chrome A arms for my leager but everything is different on my frame so FML.
-
Is that the T-pin set up?
-
Just the A Arms
-
Are the tie rods, ball joints, or bushings for these included as well or is it just the arms?
-
fx4 should be all over these
-
I know some of you guys ride TRX250r I have a set of +2 +1 chrome leager A arms I payed 200 plus shipping so that's what I'm asking for them. Thanks